Its says non ecc which would be 16 chips but lower down says dimms with
more than 18 are nor supported. The board may work with 18 but no ECC or
it could be another of many typos. I dont have any ecc to try out.
"Ed" wrote in message
news
On Fri, 26 Dec 2003 09:26:28 +0000, Peter R. Fletcher
wrote:
From experience, if you try to use a DIMM with more than _16_ chips
(the 18 seems to be a typo in the manual), the board won't boot and
POST reports a memory error - you don't get as far as counting it.
Must be the "more than 16", my (paper) manual basically says 8 devices
per side max.
Ed