On 2018-05-01 22:44, B00ze wrote:
For those who can still access the rest of this thread (for context):
I have finally taken the time to replace the v6.x controller boards for
my USB Unicomps with the v7.x controllers they sent me. The problem with
the keyboard totally freezing-up if I dared to touch it while the BIOS
was booting-up is resolved (Hurray!) The strange behaviour when waking
the computer from sleep is still the Windows re-detects the keyboard,
as tho I had unplugged it while asleep, and sometimes it does not detect
it correctly so you're stuck on the logon screen. I tested with a cheap
Logitech keyboard, and it is definitively a Unicomp thing, there is no
re-detecting the keyboard on wake with the Logitech.
The bad news is that my older 101 keys Unicomp uses a different locking
mechanism for holding the controller board than my newer 103 keys, and I
am totally unable to make the controller connect to all of the
keyboard's signal lines, so some keys are always not working. I guess I
will have to buy some foam-tape and try to make the foam push the
flexible membrane harder against the PCB. I have asked Unicomp if they
can do anything for me but had not heard back in a week - I might have
to open a new ticket rather than open my old one. Will update this thread.
Regards,
Unicomp is sending me a new foam pad. I will try to remove the old one
and place this one a little lower, so that contact is better with the
PCB. Will report back. Pretty happy with the new version 7 controller;
if this foam pad works, I will mark this thread as resolved and give a
hearty two thumbs up for Unicomp keyboards.
Best Regards,
--
! _\|/_ Sylvain /
! (o o) Memberavid-Suzuki-Fdn/EFF/Red+Cross/SPCA/Planetary-Society
oO-( )-Oo Data, ahh, I think Spot needs a litter box. -Troi