On 13 Aug, 10:55, Jethro wrote:
On 12 Aug 2007 22:35:58 GMT, "



wrote:
Jethro wrote:

I have an external hard drive connected viaUSB. It is supposed to
automatically be picked up by the computer's XP PRO SP2 when I turn it
on. Sometimes it is, sometimes not. Many times I have to unplug the
drive and plug it up again to get the computer's PnP to detect it. I
wonder why XP is missing its presence? It is getting tiring to do all
the connects/disconnects.

Anyone?

Jethro

besides the great response by mist, i would add that you can
unplug/plug at theusbend or the AC end. You flick the on/off switch
at the AC end.

you say it's tiring. so maybe try that other way!

Also, could try differnetusbports of course. But that's just an easy
part of the larger troubleshooting thing that mist mentioned.

I had almost forgotton the word 'intermittent'.. It's not that
intermittent in such a bad way though, in that you aren't waiting
around for ages.. You don't have to 'keep an eye on it for a long time
and see if the problem persists' (a common instruction to an end user
when an intermittent problem). For you though it's Just a matter of
plugging it in and out, and you'll see the problem. I don't think
there's much you can do excep try diffusbports, even a diff drive. In
the end most likely you'r going to have to not use something. hopefully
ausbport rather than a drive. Maybe you'll end up labelling a PSU
dodgy in that area. And that's if you get it solved.

I moved theUSBconnection on the computer to a second computer. It
seems to work some better there, but still is intermittent. I have
already tried switchingUSBports with same results. I have already
tried unpluggingUSBplug and power plug on the external case (yes my
internal drive is in a external case) itself which almost always
works first time.

Thanks for response

Jethro

i meant switching the AC/MAins switch on/off. That may be near you, or
you could use an extension lead to make it nearer. THat may make it
less annoying . It's easier to flick a switch than plug/unplug a
cable.

But a really good thing i forgot to mention.

pci-usb adaptor . will give you new working usb ports !!

you may also want to try switching your mbrd's usb off or on 5VSB.
Moreso off. 'cos it may be a PSU issue, maybe USB is supplied by 5VSB
and the 5VSB rail isn't supplying enough amps or volts or whatever to
the USB ports.

ps2 or usb could be on 5vsb
you can test if USB is on 5vsb if you have some usb speakers, see if
they get powered when you plug them in.
(side note- for testing if ps2 is on 5vsb, i plug a ps2 keyb in and
see the lights flash. Oddly, a usb keyb plugged into usb, doesn't
flash. A usb keyb with a usb-ps2 adaptor, plugged into ps2, does
flash).