On Mon, 03 Nov 2003 02:59:05 -0500, (Paul) wrote:

In article , "Darkfalz"
wrote:

"Sierras" wrote in message
...
Hello,

My computer has the audio jack working from the front connector only.
I get no audio from the back connector jack.

How can I change this configuration so that I get audio from the rear
jack instead of the front jack. I use amplified speakers which have a
headset jack already. Running the speaker cable to the front of the
computer is a pain. Please help!!

Unplug the audio front panel connector.

See PDF page 54 of this document:

http://www.asus.com/pub/ASUS/mb/sock...e1110_p4pe.pdf

The two blue things on the FP_AUDIO1 header are jumpers. You remove
the audio cable from your case and then put the two jumpers back.
This will give you audio on the Lime connector on the back of the
computer.

HTH,
Paul


Thanks for the detailed explanation. I found the wires you are
referring to. But there are no blue jumpers. Only wires connected to
long black plastic connectors that go directly to the pins. So when I
pull them out, there is no more sound. I guess I have to go to a
computer store and get a couple of those blue jumpers to get the sound
to the back panel.

Thanks again..