"robin" wrote:
i am having problems with upgrading disk drive size
in my ibm laptop.

i have 60 gig & a new 100 gig unit i want to fit.

i have used maxblast & norton ghost 2003 to clone
disk drive, all files are bing copied from what i can tell.

however when i put new drive in bay it will not boot up,
just get curser flashing at me, no error message.


"Timothy Daniels" wrote in message
...
You may have neglected to tell Ghost to copy the
Master Boot Record (MBR) over to the new HD.
Ghost will ask you if you want to make the new
partition "active" and whether you want the MBR
copied, too.

*TimDaniels*

Tim:
Note he said he used the Ghost 2003 version so ordinarily he/she shouldn't
be getting any message re the need to copy over the MBR nor creating an
active partition.

robin:
Using your Ghost 2003 program, give it another shot. Here are some
step-by-step instructions for using the Ghost 2003 program to clone the
contents of one HD to another HD. I recently prepared these for a local
computer club. Hopefully, they'll be of some use to you...

Before I provide you (and others who may be interested) with the detailed
instructions involved, let me make the following points.
1. It (nearly) goes without saying, that in order for the cloning process to
be successful, both the source disk (the drive you're cloning from) and the
destination disk (the drive you're cloning to) must be non-defective and
properly connected/configured in your system.
2. The OS that you're cloning must be free from system files corruption.
("If you clone garbage, garbage is what you'll get").
3. It is *vital* that you work with the latest version of the Ghost 2003
program. That's the Ghost 2003.793 build. Should you have an earlier
version, you can use Symantec's LiveUpdate feature available in the Ghost
program to download & automatically install that latest update.
4. We prefer to work with the Ghost 2003 program rather than its successor
Ghost 9 & Ghost 10 programs. For our purposes, we find the 2003 version more
straightforward in design, simpler to use, faster in carrying out its
function than the newer versions. And, I might add, just as effective for
the purposes indicated. I want to emphasize that we use the program solely
for the *direct* cloning of the contents of one HD to another HD.
5. In using the Ghost 2003 program, our preference is to work with the Ghost
2003 bootable floppy disk (or on occasion the Ghost 2003 bootable CD). We
find that media simpler to use in comparison with the Windows GUI and we
enjoy the portability aspects of using that media. But, of course, a user is
free to work in the Windows GUI should he or she prefer that environment.

So, here are step-by-step instructions for using the Ghost 2003 program
(using a Ghost 2003 bootable floppy disk or bootable CD) to directly clone
the contents of one HD to another HD...

Creating the bootable Ghost floppy disk:
1. Install the Ghost 2003 program on your computer. Make sure you're using
the latest "build" - Ghost 2003.793. If not, use Ghost's LiveUpdate feature
to automatically download the latest version. It's important that you be
using this latest "build".
2. Insert a blank floppy disk (it need not be formatted) and access your
Ghost program.
3. Click on Ghost Utilities.
4. Click on Norton Ghost Boot Wizard.
5. Select Standard Ghost Boot Disk. A dialog box will appear.
a. Select the USB 2.0 Support option (assuming you have that
capability).
b. Select the Assign DOS drive letters option and click Next.
6. Select the Use PC-DOS option.
7. Complete the process following the screen prompts.
8. Remove floppy and label accordingly.

That's it. Now you have a Ghost bootable floppy disk which you can use to
undertake your cloning operations now and in the future. So now when you
want to clone the contents of one HD to another HD you simply insert the
Ghost bootable floppy disk in your floppy drive and boot up with both drives
connected.

BTW, after creating the Ghost bootable floppy disk, you can create a Ghost
bootable CD from it using the Roxio or Nero CD burning programs, or most
other CD burning programs that allow you to create a bootable CD.
Unfortunately I know of no way to *directly* create this bootable CD from
the Ghost program (as you can do, for example, with the Acronis True Image
program).

Here's how to perform the cloning operation...
1. With both drives connected, boot up with the Ghost bootable floppy (or
Ghost bootable CD). You'll get an initial screen that displays "License
agreement warning". Right-arrow (or tab) over to the "Continue without
marking drives" button and press Enter.
2. The "About Norton Ghost" screen appears. Click OK.
3. Right-arrow twice over to the "To Disk" button and press Enter.
4. The next screen will list both your drives - the Drive 1 (source disk)
and Drive 2 (destination disk). MAKE ABSOLUTELY CERTAIN Drive 1 IS INDEED
YOUR SOURCE DISK, I.E., THE DISK YOU'RE CLONING *FROM*!
Drive 1 will be highlighted. Press Enter.
5. The next screen will have Drive 2 (destination disk) highlighted. AGAIN,
ENSURE THAT Drive 2 IS YOUR DESTINATION DISK, I.E., THE DISK YOU'RE CLONING
*TO*! Press Enter.
6. The next screen is the "Destination Drive Details" window, and reflects
your ultimate destination disk, i.e., your current Drive 2. Press your Tab
key to highlight the OK button and press Enter.
7. The "Proceed with disk clone?" dialog box will open. Left-arrow over to
the Yes button and press Enter.
8. The cloning process will begin. The data transfer speed will vary
depending upon the speed of your processor and the HDs involved. On a medium
to high-powered system you should get transfer speeds ranging from 800
MB/min to 1.5 GB/min should you be cloning internal drives. It will be
considerably slower if you're cloning to a USB external HD.
9. After you get the "Clone Completed Successfully" message, left-arrow over
to the Continue button and press Enter.
10. Down-arrow to Quit and press Enter.
11. Click Yes at the "Are you sure you want to quit?" message.
12. Remove the Ghost floppy and shut down the computer.
13. Disconnect your source disk and boot up with the cloned drive. In most
cases (but not always), a Windows "Found New Hardware" message will appear
in the Desktop's Notification Area followed by a "System Settings Change"
message window informing you that new hardware has been found and asks "Do
you want to restart your computer now?" Click Yes.
14. BTW, the reboot of the newly-cloned drive usually takes a longer time
than usual, so one must be patient. On rare occasions the system will fail
to reboot - the system will hang before reaching the Windows XP Welcome
screen. It's a rare occurrence, but you may experience it from time-to-time.
If that does occur, simply use the Ctrl-Alt-Delete keys to reboot.

Assuming you've cloned the contents of your working drive to your second
internal drive, that second drive will be bootable (after disconnecting your
primary one, of course) as indicated above. You also have the option of
cloning your working drive to a USB external hard drive. In that case the
USB EHD is *not* bootable, but you could clone the contents back to your
internal drive for restoration purposes should the need arise.

Just one other point I wish to emphasize with respect to the cloning
operation involving internal drives. Immediately following the cloning
operation and the shutdown of your machine, disconnect your source drive and
boot ONLY to the newly-cloned drive (as indicated in step 13. above). DO NOT
BOOT IMMEDIATELY FOLLOWING THE CLONING OPERATION WITH BOTH DRIVES CONNECTED.
Doing so is likely (although not always) to cause future boot problems with
the cloned drive. Obviously there is no problem in this area should a USBEHD
be involved in the cloning process since that device is not bootable in an
XP environment.
Anna