View Single Post
  #3  
Old April 16th 04, 12:59 AM
Homer J. Simpson
external usenet poster
 
Posts: n/a
Default

This board only supports 266MHz FSB CPU's (133MHz CPU Clock). That is the
limitation of the VIA KT333 chipset.

The memory can be run asynchronously at +33MHz higher than the CPU giving a
166MHz memory clock (DDR333). There is an SDRAM Frequency setting in the
BIOS Chipset Features Setup menu where you can choose 333MHz if you so
desire.

"Mike" wrote in message
...
Hello,

I have a Gigabyte 7VRXP, bought in july 2002. No problems (except Top
Performance won't work) and I'm quite happy with it. But after some

searching I
still cannot the answers to some questions. Maybe someone here can help

me?

1. How can I see if I have the 1.0/1.1/2.0 version? The board itself says
2.0~~~~~~~~~~~ but both WCPUID and SiSoft Sandra 2004 say 1.0 What is

it?
2. How do I know if a 333MHz processor (like a Athlon 2800) will work on

this
board? Can I just increase the FSB to 166?

The reason is that I would like to upgrade, not too expensive. A new

processor
is 'nessessary' but Athlon 2600 is too slow. 2800 is cheap, FSB 333

together
with my DDR333 wil give a nice boost. I understand that the 7VRXP

officially
doesn't support a FBS of 333 but the KT333 should, right?

Can anyone help me?

Greetings and thanks in advance,
Mike (from The Netherlands)