View Single Post
  #3  
Old August 19th 03, 12:27 PM
g33kfr33k
external usenet poster
 
Posts: n/a
Default

tried flashing bios ???
download new bios for yours...it should be on your motherboard
site...
no harm in trying
wont get anyu worse

On 5 Aug 2003 14:08:03 -0700, (Kevin R) wrote:

My specs:
Epox 8k3a motherboard
Corsair 256mb DDR333 PC2700 ram
AMD Athlon XP 1600+
Thermalright AX-7 heatsink with a 92mm 64cfm fan and a 80-92mm adapter
500 watt power supply
geforce 2 GTS 64mb DDR
Seagate Barracuda 40 gig
Sony 10x8x32 CDRW
D-Link DFE-530TX+ ethernet card


Okay ladies and gentlemen, this one has really got me stumped. My
bios froze on me one day and then I had to reset the CMOS to boot up
again. At that poin in time, my cpu clock speed was 146; it had
previously been at 170 for 11 months straight with a 80mm tornado fan
but I decided to underclock it and run it at 146 clock speed.
Temperature has never been a problem; My heatsink and airflow are
huge. Temperatures of my CPU have been around 50 degrees celcius with
both fans and clock speeds. The bios now freezes everytime I try to
up my cpu clock speed from 133 to 146 (146 makes my cpu an even 1800+
in quantum speed). The bios freezes after it shows the cpu and the
quantum speed but it shows the wrong quantum speed. It reads 1600+
but it should really be 1800+ because I changed the clock speed to
146. Also when it freezes, there is no ram count but it shows the
speed of PC2700 (146 CPU clock speed).

Here are the things I have tried already: (in the order as they
appear)
change CMOS battery - resulting in the same freeze
flash bios using epox utility - resulting in the same freeze
change the slot that the ram was in - resulting in the same freeze
change hard drive - resulting in the same freeze
unplug hard drive and boot - resulting in the same freeze
unplug the cd-rom - resulting in the same freeze


Please remember that I have been running a more aggressive setup
(2200+ speed) in the past with absolutely no problems. My BIOS has
only given me problems now and I have tried all the above solutions in
the past week with no resolve.