Can anyone tell me where the CPU disconnect function is on the NF7-S. I
think thats whats causing my instability @ 200mhz.

Doug

"Wayne Youngman" wrote in message
...
"Jens C. Hansen [Odense]" wrote
Wayne Youngman wrote:
Spread spectrum could theoretically cause minor instability, but the
worst is the CPU Disconnect feature.
It lets the cpu run a lot cooler when idle, but will also cause a
semi-large temporary drop in Vcore, when the processor goes directly
from idle to 100 % active - and that could make it hang or even reboot.


Hi,

Thanks for reply. That information is useful to know. At this point I
have
CPU Disconnect enabled, CPU interface enabled, and all the spread options
at
default.

The PC seemed stable at most lower Vcore settings, just that it made
Prime95
fail very quickly. Anyway the 1.75v (11x200) setting seems to be running
nicely (so far!), been running torture test for nearly 12 hours flat. I
will let it run for a few days maybe before I am 100% satisfied (fingers
crossed)

Wayne ][