"JAD" wrote in message
...

"ModeratelyConfused" wrote in message
...
Hi all,

I'm trying to get dual monitors (two Mag Innovision 17") working.
I'm
running Windows XP, and I have two video cards, a Nvidia GeForce4 MX
4000,
and a Nvidia GeForce4 MX 440. I have a Soyo P41 845PE Mobo with 512mb
ram
and a P4 2.8C 800FSB processor, along with a 420 Thermaltake PSU. I'm
having a problem getting both monitors to work at the same time.
I'm postive that both cards and both monitors work. I take one of
the
cards out, and try both monitors, and vice versa. I have my main vid
card
in PCI slot 0, and I've tried the second card in all other slots. It
resides in slot 1 now. The problem is when I get the computer to boot
(sometimes it gets to a black screen, after POST, and after the Windows
splash screen, and just hangs, eventually rebooting.) I go to the device
manager and it recognizes both cards. I then go to the display property
settings, and I see an option to span to the other monitor. I check the
box, and I hit either OK, or Apply. Every time the computer freezes
immediately after clicking, and then reboots after a period of time (45
seconds??). Does anyone have an idea of how to fix this?

Thanks,

MC


I have not had allot of luck doing this myself. I think out of 6 combos of
different cards in 3 different attempts, I got 1 to work. That was in
windows 9X type OS. AGP - PCI setup of 2 SIS cards. It was less than
inspiring. If this is a setup that is needed and not just trying for the
sake of it, I would look for a dual head card.


When you try to enable the dual monitor view, what resolution / refresh rate
are you applying?

And have you looked he http://www.realtimesoft.com/multimon/db.asp

Cheers!
--
Rez Manzoori
Remove 'Mykeks' to respond