I would cut a window in the side panel and use fan screws to fasten the
Plexiglas to the case opening then cut out a hole in the Plexiglas for a
120mm fan directly across from the pci slots. A CD can be used for the
120mm hole size and dremel will cut the Plexiglas and the metal case with a
little sand paper and black touch up paint it will look like it can from the
manufacture that way. You could get creative with the window cut with such
a large case. You could have the case side panel professionally cut with a
laser but that will cost you some additional money.

"Leadfoot" wrote in message
news:8Lv9d.9416$a85.6840@fed1read04...
http://tinyurl.com/6bpqo

I'm looking for some type of fan that will work in the rectangular grill
above the pci slots. Does noy have to be rectangular but must push air
through the grill

It's for a silverstone tjo6 coming in on monday VBSEG