It is a PAL television. And the settings are set to PAL-B... for
Belgium.
So, the settings are good.

If the output signal is the correct standard for the television, then the
problem could be bad filtering in the power supply. If possible, try usi=
ng
the AC male plug without a ground connection.

What do you mean exactly with 'AC male plus without ground connection'
? Sorry, I'm not an expert !

And thanks for your response !

David

Phil Weldon a =E9crit :

'popodom' wrote, in part:
| When I try to connect my laptop using any of the S-VHS or the
| Composite connections, I get a poor quality image with white stripes
| scrolling on the screen. My television is a Sony 21''.
_____

Is the television PAL (or SECAM)? Is the display adapter set to output P=
AL
(or SECAM) also?

I do not know why connection to the laptop power supply should make the
difference you describe, but the description does seem similar to how an
NTSC signal might display on a PAL (or SECAM) television.

If the output signal is the correct standard for the television, then the
problem could be bad filtering in the power supply. If possible, try usi=
ng
the AC male plug without a ground connection.

Phil Weldon

"popodom" wrote in message
oups.com...