Xerox Workcentre Pro 35 pcl codes
Does anyone have the PCL codes for all trays of the
Xerox Workcentre Pro 35? I need to print simple dos documents to specific trays. Please help!! :) -- Met vriendelijke groet, Johan --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.817 / Virus Database: 555 - Release Date: 15-12-2004 |
On Fri, 17 Dec 2004 18:10:15 +0100, wrote:
Does anyone have the PCL codes for all trays of the Xerox Workcentre Pro 35? I need to print simple dos documents to specific trays. A PCL5 reference gives this: The Output Bin Selection command selects either of the two output paper bins (upper or lower [rear]) for paper output. esc&l#G # = 1 - Upper Output Bin 2 - Lower (Rear) Output Bin Default = Upper Output Bin Range = 1, 2 So try this, and if you have more than two trays, just see what happens with # = 3, 4, etc. Also you might try the PJL command OUTBIN: OUTBIN Sets the default output bin. values: UPPER, LOWER, OPTIONALOUTPUTBIN1, . . .OPTIONALOUTPUTBIN62 PJL commands go before and after the PCL of the actual page. Most printers that support PCL5 or above can use PJL. |
All times are GMT +1. The time now is 05:51 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com