HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   Nvidia Videocards (http://www.hardwarebanter.com/forumdisplay.php?f=16)
-   -   My PC wont enable Direct3d????? (http://www.hardwarebanter.com/showthread.php?t=105448)

Digideus August 25th 05 06:38 PM

My PC wont enable Direct3d?????
 
Hi all,

I have an older PC with a P3 500 processor running in a Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running Windows 98
SE, has all the latest updates from Windows Update. I am running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy with it.
Unfortunately I had to remove the card and replaced it with a cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek: Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200 and
reinstalled the latest Forceware drivers from the Nvidia site and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its enabled, so
why cant I run the direct3d tests without the errors?

Anyone?

--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/Nvidia...pict61062.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=308273

Larry Roberts August 25th 05 10:55 PM

On 25 Aug 2005 13:38:30 -0400, Digideus
wrote:

Hi all,

I have an older PC with a P3 500 processor running in a Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running Windows 98
SE, has all the latest updates from Windows Update. I am running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy with it.
Unfortunately I had to remove the card and replaced it with a cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek: Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200 and
reinstalled the latest Forceware drivers from the Nvidia site and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its enabled, so
why cant I run the direct3d tests without the errors?

Anyone?



From my expirence, it seems that DirectX 9 is not stable with
Win9x OS. I was running WinME (tried 98SE as well) up till around the
time DX9 came out. I started having all kinds of problems with
graphics. Some of which you describe. If you already installed DX9,
then your stuck with it as it can't be removed unless you format the
drive, and reinstall Win98SE from scratch.
I might be wrong about DX9 being the problem, but if no one
else has a better idea, I'd say format, reinstall everything clean,
but only install upto DX8. However you'll problably need to install an
older Nvidia driver as well as the newer ones may require DX9 be
installed.

Robert Gault August 25th 05 11:27 PM

Digideus wrote:

Hi all,

I have an older PC with a P3 500 processor running in a Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running Windows 98
SE, has all the latest updates from Windows Update. I am running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy with it.
Unfortunately I had to remove the card and replaced it with a cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek: Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200 and
reinstalled the latest Forceware drivers from the Nvidia site and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its enabled, so
why cant I run the direct3d tests without the errors?

Anyone?


Probably there are residual ATI entries in the Registry. You will need
to scrub the system of all ATI files before installing the nVidia drivers.

If you do a Google search, you probably will find details for completely
removing ATI traces.

Robert Gault August 25th 05 11:30 PM

Larry Roberts wrote:

On 25 Aug 2005 13:38:30 -0400, Digideus
wrote:


Hi all,

I have an older PC with a P3 500 processor running in a Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running Windows 98
SE, has all the latest updates from Windows Update. I am running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy with it.
Unfortunately I had to remove the card and replaced it with a cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek: Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200 and
reinstalled the latest Forceware drivers from the Nvidia site and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its enabled, so
why cant I run the direct3d tests without the errors?

Anyone?




From my expirence, it seems that DirectX 9 is not stable with
Win9x OS. I was running WinME (tried 98SE as well) up till around the
time DX9 came out. I started having all kinds of problems with
graphics. Some of which you describe. If you already installed DX9,
then your stuck with it as it can't be removed unless you format the
drive, and reinstall Win98SE from scratch.
I might be wrong about DX9 being the problem, but if no one
else has a better idea, I'd say format, reinstall everything clean,
but only install upto DX8. However you'll problably need to install an
older Nvidia driver as well as the newer ones may require DX9 be
installed.


I have DirectX 9c on my Win98SE and it causes no problems. I have also
removed the running version of DirectX and gone back to others for
testing purposes. This was done without reinstalling Win98SE. There are
many Google hits for programs that can remove DirectX safely without the
need to reinstall your OS.

First of One August 26th 05 01:00 AM

There's a standalone program by ATi called AtiCimUn.exe, bundled with recent
ATi Catalyst drivers, that will remove all traces of leftover ATi drivers
and demos from your system.

Rage driver releases don't seem to bundle this program, and Add/Remove does
not actually delete the driver files.

Either extract AtiCimUn.exe from a Catalyst driver package, or email me and
I'll send you the executable (small, 108 KB).

--
"War is the continuation of politics by other means.
It can therefore be said that politics is war without
bloodshed while war is politics with bloodshed."


"Digideus" wrote in message
news:7_308273_b3ab86209bce6c5738aae28595655ca9@har dwareforumz.com...
Hi all,

I have an older PC with a P3 500 processor running in a Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running Windows 98
SE, has all the latest updates from Windows Update. I am running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy with it.
Unfortunately I had to remove the card and replaced it with a cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek: Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200 and
reinstalled the latest Forceware drivers from the Nvidia site and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its enabled, so
why cant I run the direct3d tests without the errors?

Anyone?




Digideus August 26th 05 10:38 PM

"" wrote:
On 25 Aug 2005 13:38:30 -0400, Digideus
wrote:

Hi all,

I have an older PC with a P3 500 processor running in a

Biostar M6VBE
motherboard, which I believe runs up to AGPx2. Its running

Windows 98
SE, has all the latest updates from Windows Update. I am

running what
I believe to be the latest Bios patch as well.

I originally ran an ATI Rage128 GFX card and was very happy

with it.
Unfortunately I had to remove the card and replaced it with a

cheap
Nvidia GEForce2 MX440 SE.

This seemed to work fine until I tried to run Star Trek:

Armada II.
Ever since this I cannot enable Direct3d. Even though DXDIAG

says its
enabled, I get errors when I try to test it, namely....

Direct3D 7 test results: Failure at step 8 (Creating 3D

Device):
HRESULT = 0x887602eb (error code)
Direct3D 8 test results: Failure at step 8 (Creating 3D

Device):
HRESULT = 0x8876086a (3D not available)
Direct3D 9 test results: Failure at step 8 (Creating 3D

Device):
HRESULT = 0x8876086a (3D not available)

I tried removing everything, replacded the card for a FX5200

and
reinstalled the latest Forceware drivers from the Nvidia site

and
DirectX 9.0c. but I still get the same errors.

I remove the forceware driver, reinstall the ATI card and

driver and
Direct3d works again!!!!

I reversed the process and it doesnt work.

I KNOW the FX5200 supports Direct3d, and DXDIAG says its

enabled, so
why cant I run the direct3d tests without the errors?

Anyone?



From my expirence, it seems that DirectX 9 is not stable with
Win9x OS. I was running WinME (tried 98SE as well) up till
around the
time DX9 came out. I started having all kinds of problems with
graphics. Some of which you describe. If you already installed
DX9,
then your stuck with it as it can't be removed unless you
format the
drive, and reinstall Win98SE from scratch.
I might be wrong about DX9 being the problem, but if no one
else has a better idea, I'd say format, reinstall everything
clean,
but only install upto DX8. However you'll problably need to
install an
older Nvidia driver as well as the newer ones may require DX9
be
installed.


Cheers for the Info. That makes a lot of sence actually. I think its
more the Nvidia drivers as the ATI card works fine. It just seems
stupid that a card designed to support direct3d doesnt support
direct3d yet an older card does! Go figure!!!

Cheers all the same

--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/Nvidia...pict61062.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=308433

Digideus August 26th 05 10:38 PM

"Digideus" wrote:
Cheers for the Info. That makes a lot of sence actually. I
think its more the Nvidia drivers as the ATI card works fine.
It just seems stupid that a card designed to support direct3d
doesnt support direct3d yet an older card does! Go figure!!!

Cheers all the same


Right, answering my own problem in case anyone has trouble.

Remove the latest drivers from Nvidias site (the latest ones whatever
they are!) They are rubbish on Win98 and from what ive seen, on a lot
of other platforms too.

Try the Omega optimised drivers instead (www.omegadrivers.com) as I
just installed them and tested them in DXDIAG and the results were....
Impressive.... to say the least.


All times are GMT +1. The time now is 06:32 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com