nf7 s2 die after cleaning
 

Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie

nf7 s2 die after cleaning
 

On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote:

Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie

Check that the power supply connector pins on the motherboard are not
bent.

Check that the CPU is seated properly.

Check that the CPU fan is connected to the right place.

Try clearing out the bios.

Hope you get it working :-) but maybe it was its time to die. :-(

Ak

nf7 s2 die after cleaning
 

Alfred Kaufmann wrote:
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote:


Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie


Check that the power supply connector pins on the motherboard are not
bent.

Check that the CPU is seated properly.

Check that the CPU fan is connected to the right place.

Try clearing out the bios.

Hope you get it working :-) but maybe it was its time to die. :-(

Ak
thanks for the reply, but I did all that. Its not even a year old
huhuhu. I also use 2 cpu just to make sure but nothing.

nf7 s2 die after cleaning
 

On Sat, 24 Dec 2005 16:28:25 -0600, Bernie wrote:

Alfred Kaufmann wrote:
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote:


Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie


Check that the power supply connector pins on the motherboard are not
bent.

Check that the CPU is seated properly.

Check that the CPU fan is connected to the right place.

Try clearing out the bios.

Hope you get it working :-) but maybe it was its time to die. :-(

Ak
thanks for the reply, but I did all that. Its not even a year old
huhuhu. I also use 2 cpu just to make sure but nothing.

Answers from the ABit web site.

Answers:
What is the warranty for my motherboard?

The first 2 years parts and labor is free and on the 3rd year parts is
free but labor is $25.00.

How can I get the rma no.?

You have to go to our website rma.abit-usa.com

Ak

nf7 s2 die after cleaning
 

Alfred Kaufmann wrote:
On Sat, 24 Dec 2005 16:28:25 -0600, Bernie wrote:


Alfred Kaufmann wrote:

On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote:



Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie


Check that the power supply connector pins on the motherboard are not
bent.

Check that the CPU is seated properly.

Check that the CPU fan is connected to the right place.

Try clearing out the bios.

Hope you get it working :-) but maybe it was its time to die. :-(

Ak

thanks for the reply, but I did all that. Its not even a year old
huhuhu. I also use 2 cpu just to make sure but nothing.


Answers from the ABit web site.

Answers:
What is the warranty for my motherboard?

The first 2 years parts and labor is free and on the 3rd year parts is
free but labor is $25.00.

How can I get the rma no.?

You have to go to our website


Ak
Thanks, i will surely do that.

nf7 s2 die after cleaning
 

On Sat, 24 Dec 2005 12:15:06 -0600, Bernie had a
flock of green cheek conures squawk out:

Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie


Is the AC power cable fully plugged in on both ends?

Case power switch connected to the correct pins?

Stephen
--

nf7 s2 die after cleaning
 

Stephen wrote:
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie had a
flock of green cheek conures squawk out:


Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.

I have 2500 barton on it with 1 gig ram. all components are working
bec. after so many trie decided to get a KW7, all components from nf7
working on KW7 so im sure its the board. can anybody have an idea what
went wrong.

I did ground my self for static purtoses before taking it apart and i
have done this so many times.

Is anybody have encounter this kind of problem, I love m nf7 and cant
find one thats why i end up with KW7.

thanks
Bernie



Is the AC power cable fully plugged in on both ends?

Case power switch connected to the correct pins?

Stephen
Yes it does I even use 2 different pwr supply. I working to RMA it to
abit. for now Im using the KW7 but i prefer NF7 better.