HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   Asus Motherboards (http://www.hardwarebanter.com/forumdisplay.php?f=15)
-   -   A8N-SLI and BFG GF 6800 GT OC -NVIDIA System Sentinel power warning (http://www.hardwarebanter.com/showthread.php?t=36381)

n0sp4m January 31st 05 01:07 PM

A8N-SLI and BFG GF 6800 GT OC -NVIDIA System Sentinel power warning
 
Hello,

I have just built a new system using the following new parts:

Asus A8N-SLI (PCIe) [BIOS 1003]
BFG GeForce 6800 GT OC PCIe (NVIDIA GE 6800 Series GPU driver 6.6.9.3)
1gb Corsair RAM
Ultra X-Connect 500w PS (12vdc - 34amps)
2 - Sata hdd (Samsung, 160gb ea)
1 - Pioneer DVD Writer drive

I am getting a message (attached) that the "..NVIDIA System Sentinel is
reporting that the NVIDIA-powered graphics card is not receiving sufficient
power". I know that is not true unless the dongle or its recepticle is
faulty (I already swapped PS). Do you have a command line method to read the
voltage being supplied to the video card?

I have built many PC's so I think I need help with this one. I am going to
see if there are newer NVIDIA drivers on your site. Have you heard of this
message and power NOT being the cause?

Thank you,
David



BananaOfTheNight January 31st 05 01:31 PM

I am getting a message (attached) that the "..NVIDIA System Sentinel is
reporting that the NVIDIA-powered graphics card is not receiving sufficient
power". I know that is not true unless the dongle or its recepticle is
faulty (I already swapped PS). Do you have a command line method to read the
voltage being supplied to the video card?


Ugh... I had this with my Asus FX 5900XT. I use a huge-arse Antec
TruePower 550W (though I do have to use Y-splitters as there are just
not enough plugs...), so the supplied power is probably not the problem.
I think that I burned out my graphics card in overclocking it, as if I
stick it just 1 MHz above factory, then I get this message too.

As for monitoring the voltage, get RivaTuner at
http://downloads.guru3d.com/download.php?det=163 and have a little play
around. In the 'main' tab, click on the button below the first drop-down
box and click the icon that is a microchip with a magnifying glass held
over it (called 'hardware monitoring'). Voila.

no0ne January 31st 05 03:16 PM

No OC on mine, straight out of the box and I have this issue. I have
seperate power runs to the two connectors on the video card dongle. I'll try
the utility you mentioned after I check continuity of the power dongle and
video card pins.

Thanks,
David

"BananaOfTheNight" wrote in
message ...
I am getting a message (attached) that the "..NVIDIA System Sentinel is
reporting that the NVIDIA-powered graphics card is not receiving
sufficient power". I know that is not true unless the dongle or its
recepticle is faulty (I already swapped PS). Do you have a command line
method to read the voltage being supplied to the video card?


Ugh... I had this with my Asus FX 5900XT. I use a huge-arse Antec
TruePower 550W (though I do have to use Y-splitters as there are just not
enough plugs...), so the supplied power is probably not the problem. I
think that I burned out my graphics card in overclocking it, as if I stick
it just 1 MHz above factory, then I get this message too.

As for monitoring the voltage, get RivaTuner at
http://downloads.guru3d.com/download.php?det=163 and have a little play
around. In the 'main' tab, click on the button below the first drop-down
box and click the icon that is a microchip with a magnifying glass held
over it (called 'hardware monitoring'). Voila.




n0sp4m February 1st 05 03:10 AM

It was a bad dongle.

David

"n0sp4m" wrote in message
news:f4qLd.106303$Wo.61732@lakeread08...
Hello,

I have just built a new system using the following new parts:

Asus A8N-SLI (PCIe) [BIOS 1003]
BFG GeForce 6800 GT OC PCIe (NVIDIA GE 6800 Series GPU driver 6.6.9.3)
1gb Corsair RAM
Ultra X-Connect 500w PS (12vdc - 34amps)
2 - Sata hdd (Samsung, 160gb ea)
1 - Pioneer DVD Writer drive

I am getting a message (attached) that the "..NVIDIA System Sentinel is
reporting that the NVIDIA-powered graphics card is not receiving
sufficient power". I know that is not true unless the dongle or its
recepticle is faulty (I already swapped PS). Do you have a command line
method to read the voltage being supplied to the video card?

I have built many PC's so I think I need help with this one. I am going to
see if there are newer NVIDIA drivers on your site. Have you heard of this
message and power NOT being the cause?

Thank you,
David




Dark Helmet February 3rd 05 03:04 AM

It was a bad dongle.

David


Yeah, the older you get, the more often that happens :-)

Dark Helmet




All times are GMT +1. The time now is 11:11 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com