Compaq sw3322
 

I have a switch sw3322 during the diagnostic test i have this message

Descriptor Table Memory -- Address line, random data ..............
FAILED.


!!!
!!! -- FAILED Descriptor Table Memory -- Address line, random data
--
!!!
!!! Reason: Memory test failed.
!!!
!!! Run number : 1
!!! Failed address : 0x000209C3
!!! Expected data : 0x 46
!!! Actual data : 0x 0
!!!

================================================== ==========================

I would like know how i can resolve the problem because this error
give me a problem during the start up.

Thanks
Mauro

open up the switch and see if you can replace the memory module. If its
onboard... the thing is most likely toast.

LC

wrote in message
om...
I have a switch sw3322 during the diagnostic test i have this message

Descriptor Table Memory -- Address line, random data ..............
FAILED.


!!!
!!! -- FAILED Descriptor Table Memory -- Address line, random data
--
!!!
!!! Reason: Memory test failed.
!!!
!!! Run number : 1
!!! Failed address : 0x000209C3
!!! Expected data : 0x 46
!!! Actual data : 0x 0
!!!


================================================== ==========================

I would like know how i can resolve the problem because this error
give me a problem during the start up.

Thanks
Mauro