Why mechanical failure causes HDD being undetectable by bios or OS ?
Hi!
Could someone please explain why in the case of *mechanical* failure HD becomes sometimes undetected by BIOS and/or the operating system (e.g. win xp or linux)? If it was an electronic failure then such behaviour would be obious, but why the same happens with some mechanical failures? When electronics is working in my opinion it still should be detected by bios and/or the system (win xp or linux), but often it is not. I could recover about 80% of the data from my HDD (which apparently has a mechanical failure - plates spin up and down, heads create bad noises) if only the disk could be seen by the system all the time. But often during copying of the data heads hit with a loud sound so badly that sometimes even the plates stop rotating, and the disk then dissapears from the system. It is then very difficult to make it detectable by the system again, sometimes the sytem can detect it but only after several minutes of copying it freezes and then dissapears again. Recently, I was unlucky, and even after several dozens of retries it's still undetectable by the system. Could you please advice what to do to make the disk detectable by the system all the time? What causes that it is not detectable although the failure is in mechanics not electronics? BTW, if someone has the same disk model (Quantum Fireball ST64A011), please let me know. andy |
All times are GMT +1. The time now is 11:35 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com