Problems with GeForceFX 5900 Ultra 256MB
Since everything works after the graphical interface is initialized your
monitor may not be adjusted properly for whatever mode the card is in, thus your text is badly misplaced around the screen (mostly Right/Left). Ron "Vincent Poy" wrote in message .154... Greetings: On my system on a ABIT BE6IIv2.0 Pentium III 1Ghz 133FSB Motherboard using the Intel 440BX chipset and my display being a SGI (Silicon Graphics Inc) 17.3" 1600x1024 16:10 60hz LCD display via DVI. I had no issues with a PNY Verto GeForce3 Ti500 64MB. However, with the BFG Technologies Asylum GeForceFX 5900 Ultra 256MB, what appears to happens is that everything from the BIOS Power on self testing, bios setup, and DOS would have the text flickering and blury with streaks between the characters as well as on the Award BIOS main screen where the Energy Star logo is, part of the yellow on the right side is on the left side of the screen. The screen is running at 1600x1024 at 63.36Hz. The problem seems to occur with everything before the Windows XP logo since everything after that is fine. I'm not sure what the AGP version on the Intel 440BX chipset is but the GeForce3 Ti500 requires a AGP 2.0 port and I did have some issues initially which was fixed with a newer version of Nvidia firmware for the video card. Any help would be greatly appreciated. Cheers, Vince |
I doubt that's the reason. The BIOS could be the issue too. It's a LCD
display so it has to run at native resolution unless the card is sending out the wrong frequency... Cheers, Vince "Ron Merts" wrote in : Since everything works after the graphical interface is initialized your monitor may not be adjusted properly for whatever mode the card is in, thus your text is badly misplaced around the screen (mostly Right/Left). Ron "Vincent Poy" wrote in message .154... Greetings: On my system on a ABIT BE6IIv2.0 Pentium III 1Ghz 133FSB Motherboard using the Intel 440BX chipset and my display being a SGI (Silicon Graphics Inc) 17.3" 1600x1024 16:10 60hz LCD display via DVI. I had no issues with a PNY Verto GeForce3 Ti500 64MB. However, with the BFG Technologies Asylum GeForceFX 5900 Ultra 256MB, what appears to happens is that everything from the BIOS Power on self testing, bios setup, and DOS would have the text flickering and blury with streaks between the characters as well as on the Award BIOS main screen where the Energy Star logo is, part of the yellow on the right side is on the left side of the screen. The screen is running at 1600x1024 at 63.36Hz. The problem seems to occur with everything before the Windows XP logo since everything after that is fine. I'm not sure what the AGP version on the Intel 440BX chipset is but the GeForce3 Ti500 requires a AGP 2.0 port and I did have some issues initially which was fixed with a newer version of Nvidia firmware for the video card. Any help would be greatly appreciated. Cheers, Vince |
All times are GMT +1. The time now is 01:08 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com