P4C800 bootproblem: BIOS: Overclocking Failed while not overclocking
I get the same problem...don't have a solution yet....might try updating the
bios... Willem wrote: :: Hi Fooks, :: P4C800 DeLuxe bootproblem: BIOS reports Overclocking Failed while not :: overclocking. Press F1 etc. Returning to Defaults usually dont help. :: Only happens after switched OFF for at least 1 hour. :: :: BIOS 1006, 1007.007 :: P4 2.4/533, :: 512 Mb SamSung DDR 400, :: 2 SATA WD 120 Gb, RAID 1 :: 1 NEC DVD RW, :: 1 CDRW, :: MSI MX440 AGP, :: Pinnacle PCTV PRO card :: QF50 case :: :: Even stranger: while in "repair" with PC-shop problem is "gone" boots :: anytime :: :: Any Ideas? Maybe "Earth" connection on Poweroutlet? Power supply :: undersized ? (300W). Memory ????? :: :: Yours, W |
Sounds like a dead battery.
You will get that message anytime POST detects a corrupted datum in the NVRAM part of the BIOS. GIven this only happens after the machine has been powered off for awhile would lead me to check the battery. (Willem) wrote in message . com... Hi Fooks, P4C800 DeLuxe bootproblem: BIOS reports Overclocking Failed while not overclocking. Press F1 etc. Returning to Defaults usually dont help. Only happens after switched OFF for at least 1 hour. BIOS 1006, 1007.007 P4 2.4/533, 512 Mb SamSung DDR 400, 2 SATA WD 120 Gb, RAID 1 1 NEC DVD RW, 1 CDRW, MSI MX440 AGP, Pinnacle PCTV PRO card QF50 case Even stranger: while in "repair" with PC-shop problem is "gone" boots anytime Any Ideas? Maybe "Earth" connection on Poweroutlet? Power supply undersized ? (300W). Memory ????? Yours, W |
|
Set bios back to the defaults to see if it goes away.
"Willem" wrote in message om... Hi Fooks, P4C800 DeLuxe bootproblem: BIOS reports Overclocking Failed while not overclocking. Press F1 etc. Returning to Defaults usually dont help. Only happens after switched OFF for at least 1 hour. BIOS 1006, 1007.007 P4 2.4/533, 512 Mb SamSung DDR 400, 2 SATA WD 120 Gb, RAID 1 1 NEC DVD RW, 1 CDRW, MSI MX440 AGP, Pinnacle PCTV PRO card QF50 case Even stranger: while in "repair" with PC-shop problem is "gone" boots anytime Any Ideas? Maybe "Earth" connection on Poweroutlet? Power supply undersized ? (300W). Memory ????? Yours, W |
All times are GMT +1. The time now is 05:00 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com