A7N8X DL and SD/MMC on USB3
Hi,
I have an MP3 player (with 256Mb onboard and 256Mb SD/MMC) that I connect to my A7N8X DL. That works fine as long as I use one of the four USB ports thats is already mounted on the motherboard. When I try to use 'USB3', which is connected to the front USB connectors of my Aopen case, it does not work that well anymore. Sometimes it looks ok (but I then get I/) errors), other times the 2 mass storage drives are not even recognised. I then added an 6 in 1 card reader to my system. It also included USB, firewire and audio. I connected the USB cables of this reader to the same USB3 connector on the motherboard. When I now connect the MP3 player to the USB port, the results are similar. I removed the MMC/SD card from my MP3 player and inserted it in the 6in1 reader. Similar results! Impossible to copy files to or from the SD/MMC card. Is USB3 different from the other two USB hubs on this motherboard? And how to explain this strange behaviour? Edgar |
Are you hooking up all the wires from the case or just 8 of them? I had to
hook up the "extra" ground wire to get the fronts to work correctly. This was on a different case than yours though. mike in montana "EdgarV" wrote in message ... Hi, I have an MP3 player (with 256Mb onboard and 256Mb SD/MMC) that I connect to my A7N8X DL. That works fine as long as I use one of the four USB ports thats is already mounted on the motherboard. When I try to use 'USB3', which is connected to the front USB connectors of my Aopen case, it does not work that well anymore. Sometimes it looks ok (but I then get I/) errors), other times the 2 mass storage drives are not even recognised. |
Both the case's USB connectors I used initially and the 6in1 reader
have 2 pairs of 4 wires for USB. I do not have the feeling this is the issue. Are you hooking up all the wires from the case or just 8 of them? I had to hook up the "extra" ground wire to get the fronts to work correctly. This was on a different case than yours though. mike in montana "EdgarV" wrote in message .. . Hi, I have an MP3 player (with 256Mb onboard and 256Mb SD/MMC) that I connect to my A7N8X DL. That works fine as long as I use one of the four USB ports thats is already mounted on the motherboard. When I try to use 'USB3', which is connected to the front USB connectors of my Aopen case, it does not work that well anymore. Sometimes it looks ok (but I then get I/) errors), other times the 2 mass storage drives are not even recognised. |
Both the case's USB connectors I used initially and the 6in1 reader have 2 pairs of 4 wires for USB. I do not have the feeling this is the issue. A little known fact is a USB device is only loaded on the slot you first installed it on. Some devices have ways of dealing with this issue but many do not. Someone may reply that this info is false and they have never had this trouble but YMMV. ------------ When your PC gives a little they give a lot. http://www.dslreports.com/forum/disco |
All times are GMT +1. The time now is 02:55 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com