New ATI Drivers won't install on WXPsp2 PC
 

Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT, powered
on PC, new card was detected by XP, XP loaded default MS Radeon drivers. So
far, so good but when I tried to install ATI's Catalyst 4.12 driver, the
installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2

"cil" wrote in message

Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS Radeon
drivers. So far, so good but when I tried to install ATI's Catalyst 4.12
driver, the installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2


Try a repair install from CD first..

"cil" wrote in message
...
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered
on PC, new card was detected by XP, XP loaded default MS Radeon drivers.
So
far, so good but when I tried to install ATI's Catalyst 4.12 driver, the
installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .


Two mistakes here...

1) Bought from eBay. Not necessarily bad, but not good when you have
problems. Hope you got a *GOOD* deal on it.

2) Did you clear out the old NVidia drivers first?

I agree with Noozer: clean out the video files first, whatever they
are, Nvidia, ATI, Matrox. Look in the easy spot first: control
panel/add or remove programs. I would also try the ATI driver withOUT
..net AFTER you get rid of .net itself.

its old but detonator destroyer make work getting rid of the Nvidia
drivers:
http://www.guru3d.com/detonator-destroyer/

you can also try getting rid of the ati drivers as well:
http://www2.ati.com/drivers/cat-uninstaller.exe, found in the ATI tools
area he
http://www.ati.com/support/drivers/m...lystutils.html

..e

"cil" wrote in message
...
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS Radeon
drivers. So far, so good but when I tried to install ATI's Catalyst 4.12
driver, the installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2

..NET is only needed for the new and horribly bloated Control Centre
which you do NOT need and IMO do not want.
Reinstall the drivers and basic control panel but not CCC - see how you go.

"Sleepy" wrote in message
k...

"cil" wrote in message
...
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS Radeon
drivers. So far, so good but when I tried to install ATI's Catalyst 4.12
driver, the installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2

.NET is only needed for the new and horribly bloated Control Centre
which you do NOT need and IMO do not want.
Reinstall the drivers and basic control panel but not CCC - see how you
go.


Yeah. Get the Omega drivers at www.omegadrivers.net and their control center
does the same as the ATI ones, except without the need for .NET and consumes
zero system resources, unlike ATI's Control Centre.

cil wrote:
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS
Radeon drivers. So far, so good but when I tried to install ATI's
Catalyst 4.12 driver, the installation just stops, no error message,
nada. . . I got the card new off ebay, bulk card pack only, no install
cd's.
ATI's website said MS .net required so I installed that first. . .
Any ideas on where to go from here??


Don't use the CCC drive, just use the one with the "old" control panel -
it's faster, smaller and much less hassle.

Ben
--
A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html
Questions by email will likely be ignored, please use the newsgroups.
I'm not just a number. To many, I'm known as a String...

thx to all posters!

After trying all of the above suggestions, I finally ended up doing a clean
install and the card was detected correctly. . . cil

"Ben Pope" wrote in message
...
cil wrote:
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS
Radeon drivers. So far, so good but when I tried to install ATI's
Catalyst 4.12 driver, the installation just stops, no error message,
nada. . . I got the card new off ebay, bulk card pack only, no install
cd's.
ATI's website said MS .net required so I installed that first. . .
Any ideas on where to go from here??


Don't use the CCC drive, just use the one with the "old" control panel -
it's faster, smaller and much less hassle.

Ben
--
A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html
Questions by email will likely be ignored, please use the newsgroups.
I'm not just a number. To many, I'm known as a String...

"HockeyTownUSA" wrote in message
...

"Sleepy" wrote in message
k...

"cil" wrote in message
...
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS Radeon
drivers. So far, so good but when I tried to install ATI's Catalyst 4.12
driver, the installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's. ATI's
website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2

.NET is only needed for the new and horribly bloated Control Centre
which you do NOT need and IMO do not want.
Reinstall the drivers and basic control panel but not CCC - see how you
go.


Yeah. Get the Omega drivers at www.omegadrivers.net and their control
center does the same as the ATI ones, except without the need for .NET and
consumes zero system resources, unlike ATI's Control Centre.

"zero system resources"? wow. What's next, an invisible video card?

Did you remove the Nvidea software first, or just swap out the cards. All
previous video drivers MUST be removed. Also disconnect the machine from any
internet access while upgrading, so that windows will use it's built in
driver. Only then try to load the ATI software and drivers.

--

"some fatso" wrote in message
...

"HockeyTownUSA" wrote in message
...

"Sleepy" wrote in message
k...

"cil" wrote in message
...
Swapped out my old GeForce MMX440 with a new Gigabyte Radeon 9600XT,
powered on PC, new card was detected by XP, XP loaded default MS Radeon
drivers. So far, so good but when I tried to install ATI's Catalyst
4.12 driver, the installation just stops, no error message, nada. . .
I got the card new off ebay, bulk card pack only, no install cd's.
ATI's website said MS .net required so I installed that first. . .
Any ideas on where to go from here??
tia. . .
cil

PC specs:
mb: Gigabyte GA-7VAX
cpu: Athlon XP 2800+
ram: 768mb
video: Gigabyte Radeon 9600XT GV-R96X128D
os: WXP sp2

.NET is only needed for the new and horribly bloated Control Centre
which you do NOT need and IMO do not want.
Reinstall the drivers and basic control panel but not CCC - see how you
go.


Yeah. Get the Omega drivers at www.omegadrivers.net and their control
center does the same as the ATI ones, except without the need for .NET
and consumes zero system resources, unlike ATI's Control Centre.

"zero system resources"? wow. What's next, an invisible video card?