Force a 1366 x 1024 resolution
 

Hello,

Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX 5200
graphic's card running under Windows XP.

Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
Windows XP, it is only possible to set the resolution to max 1024 x 768.

Does anybody know a way to force a different resolution, WXGA would also be
great.

Any help is very welcome.

Thank's for your help.

Regards,
S.Moser

Stefan Moser wrote:

Hello,

Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX 5200
graphic's card running under Windows XP.

Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
Windows XP, it is only possible to set the resolution to max 1024 x 768.

Does anybody know a way to force a different resolution, WXGA would also be
great.

Any help is very welcome.

Thank's for your help.

Regards,
S.Moser



Whether you're using this as a secondary monitor or not, you'll need to
have the appropriate drivers installed for the device to select all it's
resolutions and refresh rates. Check Sony's site for a monitor .inf
file. 1366x1024 is the native resolution correct? Most of the time
setting it to Plug and Play Monitor won't work for that (unless it's a
4:3 aspect ratio display mode).

Powerstrip will work for you
i have mine set to 1280*768

"Stefan Moser" wrote in message
...
Hello,

Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX
5200
graphic's card running under Windows XP.

Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
Windows XP, it is only possible to set the resolution to max 1024 x 768.

Does anybody know a way to force a different resolution, WXGA would also
be
great.

Any help is very welcome.

Thank's for your help.

Regards,
S.Moser

Ill try it,
Thank's for your help
S.Moser


"Alex Chan" schrieb im Newsbeitrag
nk.net...
Powerstrip will work for you
i have mine set to 1280*768

"Stefan Moser" wrote in message
...
Hello,

Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX
5200
graphic's card running under Windows XP.

Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
Windows XP, it is only possible to set the resolution to max 1024 x 768.

Does anybody know a way to force a different resolution, WXGA would also
be
great.

Any help is very welcome.

Thank's for your help.

Regards,
S.Moser