StorageWorks Mgmt Software
Hello boys and girls, Merry Christmas.
Does anyone have .iso or .nrg's of the complete management suite (multi-path and adapter loadbalancing/failover included) that would be used with RA4x00 fibrechannel storage systems? If so, please email me at: info at dnsplus dot net thanks, LC |
Hello Again,
Well... I am making progress. It turns out that the RA4000 has selective publishing with firmware 2.60 (currently I have 2.48). I cant upgrade the firmware because I am using emulex LP7000 HBA's. I am looking for a supported compaq controller now. But i have proved that the emulex cards work with these systems (just not for the ROM updates). Data rates from a SA3200 attached to an F2 to an RA4000 was an average of 4M/sec (16.2G/hour), and from the RA to the F2 was about 1.8G/min (30M/s) .... thats kinda odd. The 3200 is much better at writing than reading, and the RA is much better at reading than writing. I tested with robocopy using the /MIR switch. Also, the 8 port FCAL switch can be configured to route between WWN's and domains. I have my eye on a couple of those as well. As for configuration, ACU 4.30 and higher can do it, so there arent any special config apps required. Failover is another story, and something i probably wont pursue. It also appears that the regular FC controllers from the RA series are not compatable with the F/U series of storage systems. I took the beast apart, and there is a notch in the card that bumps against a metal bar that was deliberately put there by compaq. There are, however, FC upgrades for the F/U chassis. These appear to be very rare and expensive when priced online. Yet another option, as I have 2 F2's and 1 RA4000 (looking at other RA4x00 chassis as well. I still need one branded HBA in order to be able to configure for selective publishing to individual controllers.... hey, sounds like im rambling... probably. I feel a winter cold coming on. Just thought i would share my findings with the group, in case anyone is thinking about getting thier hands dirty with this stuff, since its so cheap right now. Cheers, and happy holidays. LC "NuT CrAcKeR" wrote in message ... Hello boys and girls, Merry Christmas. Does anyone have .iso or .nrg's of the complete management suite (multi-path and adapter loadbalancing/failover included) that would be used with RA4x00 fibrechannel storage systems? If so, please email me at: info at dnsplus dot net thanks, LC |
All times are GMT +1. The time now is 11:05 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com