new 530S and axin probelms
Greetings all,
I have been reloading mysoftware for the new PC. When I get to activsync 4.xx I can get the axim to load fine but I lose the abilty to use my fax/modem. Somehow the axim and the modem are on the same COM3. if i leave the axim unplugged the modem/fax works, if it is plugged in the modem/fax lock up. I have tried to find a solution but so far have failed, that is why I am here , looking for some help or guidance to a website for help. Thanks Dave- |
new 530S and axin probelms
"xanth" wrote in message ... Greetings all, I have been reloading mysoftware for the new PC. When I get to activsync 4.xx I can get the axim to load fine but I lose the abilty to use my fax/modem. Somehow the axim and the modem are on the same COM3. if i leave the axim unplugged the modem/fax works, if it is plugged in the modem/fax lock up. I have tried to find a solution but so far have failed, that is why I am here , looking for some help or guidance to a website for help. Thanks Dave- No solution, but an option might be to either use an online fax service or a standalone fax machine. Most OEM modems are more effective as fishing lures than reliable devices - I'd bet they cost PC mfrs less than $5. All that said, you might try to find an updated modem driver/software version - or if it worked at one time you might try to identify the specific version(s) of any softwares for both the modem and Axim. |
new 530S and axin probelms
Hi!
Most OEM modems are more effective as fishing lures than reliable devices - I'd bet they cost PC mfrs less than $5. That would be funny if it wasn't true. These days most modems don't even have proper circuitry to handle the phone line since it's all integrated into the almost-microscopic "placeholder" IC on the modem card. Which means that a surge that once would destroy only the line facing circuitry in the modem now usually eats the motherboard as well. (I have a huge pile of modems with "craters" in the IC that I steal parts off of for projects.) But to bring this back on topic... I think the OP may have some options, if they go into the modem entry in Device Manager and look at the advanced properties, they might be able to change the resources the modem is using. Today's modems can handle almost unlimited placement in the system's resource table. They're no longer limited to COM1/COM3 or COM2/COM4 and the underlying fixed resources. William |
new 530S and axin probelms
William,
Thanks for your suggestion, I moved the modem to COM 1, tunred on my axim, plugged and it seems to be work, it connected, I tried Hyperterm and it dailed out. now all Ihave to do is install my fax software and test it. It seems so odd that we can configure the hareware anywhere we we want, ( within reason ) I have alsway choosen COM 3 for modems from when I started with my 1st 386 machine and connection to BBS with 2400 baud. Now all I have to do is figure out how to get the Axim to connect to my wireless system, it was great unitl I made my wireless secure with WAPII The info is correct in my Axim but does not connect. Dave- "William R. Walsh" m wrote in message news:VEdDk.361073$yE1.203128@attbi_s21... Hi! Most OEM modems are more effective as fishing lures than reliable devices - I'd bet they cost PC mfrs less than $5. That would be funny if it wasn't true. These days most modems don't even have proper circuitry to handle the phone line since it's all integrated into the almost-microscopic "placeholder" IC on the modem card. Which means that a surge that once would destroy only the line facing circuitry in the modem now usually eats the motherboard as well. (I have a huge pile of modems with "craters" in the IC that I steal parts off of for projects.) But to bring this back on topic... I think the OP may have some options, if they go into the modem entry in Device Manager and look at the advanced properties, they might be able to change the resources the modem is using. Today's modems can handle almost unlimited placement in the system's resource table. They're no longer limited to COM1/COM3 or COM2/COM4 and the underlying fixed resources. William |
All times are GMT +1. The time now is 11:18 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com