Networking with Azus K8V SE Deluxe
I have just changed my m/b from a Gigabyte GA7IXE4 to an Asus K8V SE
Deluxe. I had an Ethernet Network card installed in a PCI slot on the GA 7IXE4 .. I notice that the K8V SE Deluxe comes with a " 1394 Net Adapter " and a "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter, Copper RJ-45" It also has a port which looks like it will take a P2P cross-over cable. If I want to connect my PC to a laptop do I need to re-install the Ethernet card into the K8V SE board or does the above " Marvel Yukon Gigabyte .......etc " description mean that this board is already equipped for Networking ? B.N. -- to reply by e-mail remove "admiral_" |
I have just changed my m/b from a Gigabyte GA7IXE4 to an Asus K8V SE
Deluxe. I had an Ethernet Network card installed in a PCI slot on the GA 7IXE4 . I notice that the K8V SE Deluxe comes with a " 1394 Net Adapter " and a Yes... works great with my firewire camcorder. "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter, Copper RJ-45" It also has a port which looks like it will take a P2P cross-over cable. I assume you mean a crossed pair for network sharing across 2 machines using the standard net port.... see below. If I want to connect my PC to a laptop do I need to re-install the Ethernet card into the K8V SE board or does the above " Marvel Yukon Gigabyte .......etc " description mean that this board is already equipped for Networking ? Yes... been using mine for several months without any problems. I use it with my RJ45 fitted cable modem via a router to my m/c and my wifes. works fine. You don't need the additional pci net card. Mike |
On Wed, 22 Sep 2004 22:21:37 GMT, Mike
wrote: I have just changed my m/b from a Gigabyte GA7IXE4 to an Asus K8V SE Deluxe. I had an Ethernet Network card installed in a PCI slot on the GA 7IXE4 . I notice that the K8V SE Deluxe comes with a " 1394 Net Adapter " and a Yes... works great with my firewire camcorder. "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter, Copper RJ-45" It also has a port which looks like it will take a P2P cross-over cable. I assume you mean a crossed pair for network sharing across 2 machines using the standard net port.... see below. Yes , I merely want to connect two machines at home in P2P with the relevant cable - sorry didn't explain that too well in my original post ! If I want to connect my PC to a laptop do I need to re-install the Ethernet card into the K8V SE board or does the above " Marvel Yukon Gigabyte .......etc " description mean that this board is already equipped for Networking ? Yes... been using mine for several months without any problems. I use it with my RJ45 fitted cable modem via a router to my m/c and my wifes. works fine. You don't need the additional pci net card. Thanks for the help. B.N. -- to reply by e-mail remove "admiral_" |
All times are GMT +1. The time now is 06:54 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com