motherboard help. Compaq Presario 5700T Motherboard
I brought this motherboard on ebay with out a book. I need to know how to set
up the pin's or wire for the power led and keys. I don't want to burn the motherboard from just guesting at it. If anybody could help me that would be great. This is what I have. This is my personal Compaq Presario 5700T Motherboard (136109-102) with the Processor and memory still installed. The processor is Pentium III 700mhz and there are 3 - 128mb Pc100/133 modules. -- Message posted via HWKB.com http://www.hwkb.com/Uwe/Forums.aspx/...built/200609/1 |
motherboard help. Compaq Presario 5700T Motherboard
"marq122 via HWKB.com" u26242@uwe wrote in message news:65e8f2e88775b@uwe... I brought this motherboard on ebay with out a book. I need to know how to set up the pin's or wire for the power led and keys. I don't want to burn the motherboard from just guesting at it. If anybody could help me that would be great. This is what I have. This is my personal Compaq Presario 5700T Motherboard (136109-102) with the Processor and memory still installed. The processor is Pentium III 700mhz and there are 3 - 128mb Pc100/133 modules. -- You aren't going to burn the motherboard by guessing at it. Power and reset are momentary contact. Either they are connected, or they aren't. You can't "short" it in reverse. :) The LEDs connections can be reversed. Three things will happen if you guess: 1) Nothing (wrong pins) 2) Nothing (right pins, but reversed wires) 3) LEDs work correctly Having said that, you shouldn't have to guess. Most mainboards are marked somehow, though the print is microscopic and often abbreviated, such as 2-point type reading "pwr_led" with little + and - signs. That would be the Power light on the front of the case, and the +/- shows which way to connect the wires. At worst, if the wires aren't marked, you've got a 50/50 shot at it, so you'll get it right in 2 tries or less. :) -Dave |
motherboard help. Compaq Presario 5700T Motherboard
Dave wrote:
I brought this motherboard on ebay with out a book. I need to know how to set [quoted text clipped - 7 lines] and there are 3 - 128mb Pc100/133 modules. You aren't going to burn the motherboard by guessing at it. Power and reset are momentary contact. Either they are connected, or they aren't. You can't "short" it in reverse. :) The LEDs connections can be reversed. Three things will happen if you guess: 1) Nothing (wrong pins) 2) Nothing (right pins, but reversed wires) 3) LEDs work correctly Having said that, you shouldn't have to guess. Most mainboards are marked somehow, though the print is microscopic and often abbreviated, such as 2-point type reading "pwr_led" with little + and - signs. That would be the Power light on the front of the case, and the +/- shows which way to connect the wires. At worst, if the wires aren't marked, you've got a 50/50 shot at it, so you'll get it right in 2 tries or less. :) -Dave Ok the wires are mark. The board is not all it show is number of pin. 1, 2 , J10 19,20. So I don't know where the power led will go and the reset swich and the hdd led. Is it ok if I do guest? -- Message posted via HWKB.com http://www.hwkb.com/Uwe/Forums.aspx/...built/200609/1 |
All times are GMT +1. The time now is 01:16 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com