Hercules 3D Prophet 7500 128MB Dual Display
 

Anybody out there know if this card is compatible with a MB that supports
..8V or 1.5V AGP cards?

Neither ATI or Hercules have documented the voltage of this chip, based on
the Radeon 7500 and/or card.


--
Thanks,
TG

..8v ????

it depends on how it's keyed.

If it fits in the board, it should work.

Check to see which AGP spec the card matches that of the mobo you are using.
1x and 2x (AGP1.0)boards are usually 3.x volts, where 2x, 4x (AGP 2.0) and
2x, 4x, and 8x (AGP 3.0)boards are 1.5v. Its all in how the connector is
keyed. AGP Pro is 1.5V, but has a different slot-key scheme and often
requires that the vid card has an additonal power source.

NuTs

"tmgibs" wrote in message
...
Anybody out there know if this card is compatible with a MB that supports
.8V or 1.5V AGP cards?

Neither ATI or Hercules have documented the voltage of this chip, based on
the Radeon 7500 and/or card.


--
Thanks,
TG