| Page 1 of 2 | 1 | 2 |
|
|
|
Radeon 9600 overclocking question
Well, I got this Hightech Excalibur R9600 (nonpro) and any utility I
use for OC, it has no effect on this card. Actually, the freqs I set manually are holding only for 10 or less seconds. WTF? I tried Powerstrip, Rage3D Tweak, Radclocker... No use. Is there any other way to overclock this card? I know that Sapphire Atlantis 9600 i OC-able enough but can someone send me BIOS image from this card? Maybe that would help, what do You think? -- Korky -------------------------------- My garden is well -how is Yours? |
What version of windows are you using?
Kristijan Korazija wrote: Well, I got this Hightech Excalibur R9600 (nonpro) and any utility I use for OC, it has no effect on this card. Actually, the freqs I set manually are holding only for 10 or less seconds. WTF? I tried Powerstrip, Rage3D Tweak, Radclocker... No use. Is there any other way to overclock this card? I know that Sapphire Atlantis 9600 i OC-able enough but can someone send me BIOS image from this card? Maybe that would help, what do You think? |
Kristijan Korazija wrote:
Is there any other way to overclock this card? Anyone? Please? :^\ -- Korky -------------------------------- My garden is well -how is Yours? |
Kristijan Korazija wrote:
Is there any other way to overclock this card? Anyone? Please? :^\ I can't belive it. Am I the only person on this world who bought this Hightech Excalibur Radeon 9600 card? :^) Actualy, the one that can't overclock it. -- Korky -------------------------------- My garden is well -how is Yours? |
"Kristijan Korazija" wrote in message
... Kristijan Korazija wrote: Is there any other way to overclock this card? Anyone? Please? :^\ I can't belive it. Am I the only person on this world who bought this Hightech Excalibur Radeon 9600 card? :^) Actualy, the one that can't overclock it. -- Korky -------------------------------- My garden is well -how is Yours? Korky, I haven't had any experience with your card or OEM, but, AIR from reading through this group, cards like the 9600, which is built on the same chip as the 9800 are likely to be fairly well protected against overclocking, or everyone would buy them and run them as 9800s. I'm not sure of this; but if you do some reading through the group, you may find confirmation or otherwise. HTH patrickp |
patrickp wrote:
Korky, I haven't had any experience with your card or OEM, but, AIR from reading through this group, cards like the 9600, which is built on the same chip as the 9800 are likely to be fairly well protected against overclocking, or everyone would buy them and run them as 9800s. Nope, R9600 is not built on the same chip as R9800. It's just some kind of replacement for low end cards such as R9500 & R9500Pro and it uses a brand new 0.13 micron core with "only" 70 mil. (or a bit more, not sure) transistors. This card can't be moded in any of this high end models. P.S. How big is Redline utility from Sapphire? Is it small enough to send it to mail? I can't find it on net. Could someone send me this one on mail for me to try it? Address is kristijan.korazija(at)inet.hr (please replace (at) with @). -- Korky -------------------------------- My garden is well -how is Yours? |
Kristijan Korazija wrote:
Is there any other way to overclock this card? Anyone? Please? :^\ Well, if anybody wants to know, I found out that card can be overclocked only if you use Catalyst versions lower that 3.5. ATI has disabled OC-ing in new Catalysts for this R9600 nonpro cards. :^( How lame. -- Korky -------------------------------- My garden is well -how is Yours? |
It depends on the brand of card too. I have a connect 3d 9600 pro and
the omega drivers wouldn't work with it at all. On Thu, 14 Aug 2003 08:20:20 -0500, "Strontium" wrote: Or, use the Omegas... - Kristijan Korazija stood up at show-n-tell, in , and said: Kristijan Korazija wrote: Is there any other way to overclock this card? Anyone? Please? :^\ Well, if anybody wants to know, I found out that card can be overclocked only if you use Catalyst versions lower that 3.5. ATI has disabled OC-ing in new Catalysts for this R9600 nonpro cards. :^( How lame. |
mike wrote:
It depends on the brand of card too. I have a connect 3d 9600 pro and the omega drivers wouldn't work with it at all. They don't work with my card to. Hightech Excalibur Radeon 9600. -- Korky -------------------------------- My garden is well -how is Yours? |
| All times are GMT +1. The time now is 06:43 AM. |
|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com