P4P800-D + 4 256mb mem sticks question = read please
 

Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and all works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)

http://www.ocztechnology.com/product...annel+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into the 1st
2 blue slots, i can see the message on bootup saying " dual channel 400 mhz"
= so this is ok + i can turn the asus memory accel on with no problems and a
nice memory read increase according to aida32, something north of 4500 if i
remember correctly, the write stays about the same with or without the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot up i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? + when i
try to enable the asus memory accel it says it can't boot and i have to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed as just
the 2 memory sticks themselves but the read test is just shy of 4000 if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they would have
worked at 400 = the memory boost, seems like the p4p800 is real picky when
you populate all 4

This is the response i got from OCZ support = makes sense to =

Hi,
Based on our experience, usually installing more than 2 modules
will cause system performance drop no matter what Intel based chipset
motherboards you use. P4P800 is even pickier than other boards. So we
can only guarantee one pair load. Do you think if it is possible to
exchange your 4 x 256MB to 2 x 512MB PC3200 with your vendor? I think
it is the best approach to solve your current issue. If there is
anything else we can help you, please feel free to let us know.


Sincerely,

Technical Support
Phone: 408.733.7600
Fax: 408.733.5200
Email:
www.ocztechnology.com


"harry" wrote in message
e.rogers.com...
Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and all
works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)


http://www.ocztechnology.com/product...annel+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into the
1st
2 blue slots, i can see the message on bootup saying " dual channel 400
mhz"
= so this is ok + i can turn the asus memory accel on with no problems and
a
nice memory read increase according to aida32, something north of 4500 if
i
remember correctly, the write stays about the same with or without the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot up i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? + when
i
try to enable the asus memory accel it says it can't boot and i have to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have
similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed as
just
the 2 memory sticks themselves but the read test is just shy of 4000 if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they would have
worked at 400 = the memory boost, seems like the p4p800 is real picky when
you populate all 4

You should have used (2) 512MB sticks. It's much more stable in that board,
and boards in general.

--
DaveW



"harry" wrote in message
e.rogers.com...
Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and all
works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)


http://www.ocztechnology.com/product...annel+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into the
1st
2 blue slots, i can see the message on bootup saying " dual channel 400
mhz"
= so this is ok + i can turn the asus memory accel on with no problems and
a
nice memory read increase according to aida32, something north of 4500 if
i
remember correctly, the write stays about the same with or without the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot up i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? + when
i
try to enable the asus memory accel it says it can't boot and i have to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have
similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed as
just
the 2 memory sticks themselves but the read test is just shy of 4000 if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they would have
worked at 400 = the memory boost, seems like the p4p800 is real picky when
you populate all 4

it's VERY stable now with my 4 256 sticks but i just lose alittle on the
performance as opposed to 2 512 sticks

"DaveW" wrote in message
news:JxrEb.597348$Fm2.546178@attbi_s04...
You should have used (2) 512MB sticks. It's much more stable in that
board,
and boards in general.

--
DaveW



"harry" wrote in message
e.rogers.com...
Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and all
works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)



http://www.ocztechnology.com/product...annel+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into the
1st
2 blue slots, i can see the message on bootup saying " dual channel 400
mhz"
= so this is ok + i can turn the asus memory accel on with no problems
and
a
nice memory read increase according to aida32, something north of 4500
if
i
remember correctly, the write stays about the same with or without the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot up i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? +
when
i
try to enable the asus memory accel it says it can't boot and i have to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have
similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed as
just
the 2 memory sticks themselves but the read test is just shy of 4000 if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they would
have
worked at 400 = the memory boost, seems like the p4p800 is real picky
when
you populate all 4

Go for the 2 x 512 if you can - you have an upgrade path if you need one &
it will work.
- Tim


"harry" wrote in message
.cable.rogers.com...
it's VERY stable now with my 4 256 sticks but i just lose alittle on the
performance as opposed to 2 512 sticks

"DaveW" wrote in message
news:JxrEb.597348$Fm2.546178@attbi_s04...
You should have used (2) 512MB sticks. It's much more stable in that
board,
and boards in general.

--
DaveW



"harry" wrote in message
e.rogers.com...
Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and all
works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)




http://www.ocztechnology.com/product...0+Dual+Channel
+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into
the
1st
2 blue slots, i can see the message on bootup saying " dual channel
400
mhz"
= so this is ok + i can turn the asus memory accel on with no problems
and
a
nice memory read increase according to aida32, something north of 4500
if
i
remember correctly, the write stays about the same with or without the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot up
i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? +
when
i
try to enable the asus memory accel it says it can't boot and i have
to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have
similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed
as
just
the 2 memory sticks themselves but the read test is just shy of 4000
if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they would
have
worked at 400 = the memory boost, seems like the p4p800 is real picky
when
you populate all 4

I have 4 256 meg sticks in my system and I just changed the auto sensing of
the DDR speed to 400Mhz (like yours mine was not sensing 4 sticks properly.)
Mine figured they were 320Mhz. I just cranked it up to 400Mhz and all is
well, no instability at all...

Mike

"Tim" wrote in message ...
Go for the 2 x 512 if you can - you have an upgrade path if you need one &
it will work.
- Tim


"harry" wrote in message
.cable.rogers.com...
it's VERY stable now with my 4 256 sticks but i just lose alittle on the
performance as opposed to 2 512 sticks

"DaveW" wrote in message
news:JxrEb.597348$Fm2.546178@attbi_s04...
You should have used (2) 512MB sticks. It's much more stable in that
board,
and boards in general.

--
DaveW



"harry" wrote in message
e.rogers.com...
Hi, i've just bought an asus p4p800-d + p4 3.0C HT 800 + winxp and
all
works
fine, though i have a question about my memory.

i have 2 of these kits :
Dual Channel Optimized DDR Kits - EL Platinum Edition
512MB (256MBx2) PC3200 DDR400 CAS2 (OCZ400512ELDCPE-K)





http://www.ocztechnology.com/product...0+Dual+Channel
+Platinum


= total = 1g

now if i install just 1 pair [for 512kb], doesn't matter which into
the
1st
2 blue slots, i can see the message on bootup saying " dual channel
400
mhz"
= so this is ok + i can turn the asus memory accel on with no
problems
and
a
nice memory read increase according to aida32, something north of
4500
if
i
remember correctly, the write stays about the same with or without
the
memory bios boost.

Now when i populate all 4 memory slots with the 2 kits [1g] on boot
up
i
see =" dual channel 266 mhz" !!!! what happened to my 400 mhz????? +
when
i
try to enable the asus memory accel it says it can't boot and i have
to
disable it ????

Why is this happening when i use all 4 memory sticks? Anybody have
similiar
exp? thanks

ps. it's not a huge big deal, the write test is about the same speed
as
just
the 2 memory sticks themselves but the read test is just shy of 4000
if
remember correctly.

I'm thinking i should have just bought the 2 512kb kit and they
would
have
worked at 400 = the memory boost, seems like the p4p800 is real
picky
when
you populate all 4