Battery Charging on Evo N620c
 

Problem is that battery charges up to 99% then stops there.
This means that the battery discharge and recondition option in the
CMOS boot-setup will not work because the computer believes that it is
not yet charged.

Any suggestions?

Thanks

Battery Charging on Evo N620c
 

wrote in message
oups.com...
Problem is that battery charges up to 99% then stops there.
This means that the battery discharge and recondition option in the
CMOS boot-setup will not work because the computer believes that it is
not yet charged.

Any suggestions?

Thanks

So it seems that the battery/program need to be calibrated so battery's
MAX is 100%
I found this:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3 21957&prodSeriesId=316664&prodNameId=316666&swEnvO ID=1093&swLang=8&mode=2&taskId=135&swItem=PSG_I166 37-39216')

in a thread :
" Try installing the Compaq Power Management software and see if you can't
calibrate the battery. "
http://forums1.itrc.hp.com/service/f...readId=1095012