Hi All Can anyone help me with this problem? I have the MB board installed and am able to configure the BIOS. I have a DVD drive connected as a slave to the RED PATA IDE channel 1 connector that works fine. If I connect a Hard drive as Master to the RED PATA IDE connector it

On Thu, 04 May 2006 21:10:53 +0100, Sarge® wrote: Hey All, I just purchaced a non working GA-7N400 Pro 2 MB from ebay. I installed known working components after clearing the BIOS and removing the battery overnight and booted with a PCI Post Mortem card in the bottom...

Hi there, I have just put myself together a pc with spec as: Gigabyte GA-K8N Pro Sli mobo AMD Athlon 64 x2 4400+ Evga Geforce 7800 GT (PCI-E) 2x 160GB Seagate Barracuda 9 sata2 (raid stripped) 2GB PC3200 (2x1GB) Levicom 550W ATX PSU Samsung DVDRW

Does anyone know as to whether GA-8IPE775G Rev 1.1 can support Intel's 65 nm CPU 651 (3.4G). In Gagabyte's website it said it doesn't for rev. 1.1 but OK for rev. 1.2 with F6 BIOS. But ver.1.1 and 1.2 looks very alike and I wonder how true is the information. Both ver 1.1 and 1.2 motherboard...

I have 2 WD2500JS Sata2 drives that I have jumpered down to 150 and still the bios won't detect either of the drives. I have tried the Sil and the nVidia controllers. Only help from gigabyte was telling me to install the driver. The problem is the BIOS shows none for the SATA drives. I have...

On Thu, 04 May 2006 21:10:53 +0100, Sarge® wrote: Hey All, I just purchaced a non working GA-7N400 Pro 2 MB from ebay. I installed known working components after clearing the BIOS and removing the battery overnight and booted with a PCI Post Mortem card in the bottom...

Yesterday I decided to reinstall Windows XP a fresh. My PC has Raid O configuration and thus I had to download a driver that I saved onto a floppy. This should have been activated in the blue Windows setup screen by pressing F6. But it didn't. Instead it came up with the error "File...

I had one 184-pin 512 MB DDR PC2100 RAM module installed and now I want to add another 512MB stick. When I add a second module of the same RAM (184-pin 512 MB DDR PC2100 RAM ), the system just doesn't see it. It sees the original 512MBs, but it doesn't see the new RAM. I've tried different...

BAD BIOS FLASH? Visit: http://BADBIOSFLASH.COM or http://CheapBiosChips.COM For Replacement chips $16 SHIPPED re-flash of existing chip $10

Have a peep here, you'll have to have a root around though-: http://www.bioscentral.com/intel/jn440bxbios.htm you didn't say what bios it was, i.e. Award etc.... but you should see it in the left hand window. Davy

Hi folks, I have a K8N Pro-SLI with a stereo speakerset connected to the line-out of the onboard audio. This output always gives a certain degree of background noise, which is very clearly audible. When there's network traffic, the noise becomes louder than my PC. I also connected the front-audio...

I have a GA-K8VM800M MB with a 64 bit 3000+ processor and when I installed the Sata drive( WD 250 Gig) as the boot drive I had problems until I moved the IDE drive that was IDE0 Primary Master to Slave. Then it acknowledged the SATA as the boot drive but named it as G:\ and the IDE slave as C:\....

Hi all, I have a Gigabyte GA-6WMM7 in a Packard Bell PC. It had 256MB of RAM in 2x128MB sticks. I upgraded as per advised by both Crucial, Kingston and a Colleague to 512, with 2x256MB Kingston PC133 Sticks, but only 128MB per stick is recognized. Am I missing something? The PC is running...

Hello, I want to connect my hard drive to the IDE 3 socket. I don't want to the use the Raid function, just the regular ATA/133 function. I'm trying to set this up on a mandrake linux system and I'm totally confused. Do i need the driver for the Promise FastTrack 100 card or the Promise Ultra 133...

Well, i think it would be nice to share my experience here, with my brand new mobo. It has NO chipset-fan. Thats nice. But.. the bios doesnt support slow fans, so the minimum speed is 1400 rpm, making my Zalman fan (37,50 Euro) pretty much loud, when playing 3d games and still audible in normal...

Hi, I've already done a google search to find (also inside this newsgroup) a solution to my problem, but yet I haven't found precise answers. I've just bought an external USB TV Card. When I turn off my PC simply using shutdown the TV card remains feeded, and its blue led is always on. I read that...

I recently recevied a custom built computer with an GA-8IK1100 motherboard in it. I opened it up and checked it out. It all seamed to be in great shape untill I turned it on. I got a message on the screen saying monitor wasn't connected, etc. I have printed off a manual from the website figuring...

I would like to change my hard drive connection from IDE 1 to IDE 3 on my gigabyte GA-8IEXP motherboard. I would also like to utilize the ATA133 feature of IDE 3 which uses the Promise 20276 chip. My OS is Mandrake 10.0 , (2.6.3.7 kernel). I only have the one hard drive and it is hda on IDE 1. I...

I have a pc with a gigabyte motherboard which has been working ok for the last 2 years. Two days ago, it turned off on its own. Since then, when I press the on switch, it briefly comes on for about 1 second and goes off (lights and fans come on and go off after 1 second). What could be wrong?...

I'm currently using the F8 BIOS on my GigaByte GA-K8NSNXP-939 motherboard. I'm using this because the Sil3512 bios embedded in it gives the best Norton Ghost performance in DOS. Is it possible to extract the Sil3512 BIOS in the F8 BIOS and put it into the F13 BIOS instead? Thanks --