Hi, anyone having an idea why my 7dxe board doesn't like my new radeon agp card? An old tnt2 in agp-4x mode works fine with the 7dxe and the radeon card also works fine in 4x mode in another mainboard (even older sis735 chipset). When I plug in the new card, the system just complains on startup...

I've just got a 7DXE and Athlon 2000 but when installed in an existing (working) ATX case, the machine automatically powers off 5 seconds after being powered on. No warning beeps from speaker. I have attempted moving the RAM to each of the 3 slots and with only CPU, RAM and fan connected to the...

I've just got a 7DXE and Athlon 2000 but when installed in an existing (working) ATX case, the machine automatically powers off 5 seconds after being powered on. No warning beeps from speaker. I have attempted moving the RAM to each of the 3 slots and with only CPU, RAM and fan connected to the...

I have found a lot of postings from people having trouble with CPUs running too hot on this MB, many due to too high VCore. Sadly, I have the same problem. VCore should be 1.75V, but is 1.81/1.82V. I have searched through Usenet and WWW for a solution, but no luck. If there is anyone out there...

Hello, Recently changed to XP with a PC with 7DXR mobo. Have had problem with random restarts. Can anyone help please. Thank you

have 7DXR board which has problems rebooting. A warm reset never works and a cold boot (i.e power off and on at the wall switch) only works after leaving the pc off for 5-10 minutes. Otherwise the machine powers on, drives and fans spin up but no inital beep from the board and no POST. Any ideas...

I have XP Pro installed on a Gigabyte 7IXE4 1.1 M/B. This has 2 sticks of NV Ram memory of 256 Mbts each. Until recently , on each Bootup , I got the screen showing a total of 512 Mbts of memory after the message " Checking NV Ram " Several weeks ago I noticed that , occasionally , on Bootup...

I have installed an AMD 2400+ but on start up (and in Sandra) it is reported as an AMD 1800+. I have tried changing the dip switches but this had no effect - does anyone know why this is? I have of course cleared the CMOS memory Steve

I am having problems with the temp and fan sensors. As indicated in EasyTune 4 my system temp is 38 C and the CPU temp is 32 C?!? The CPU fan is correct. I have a manual adjustment. The system fan shows 2116 rpm and the power fan 0 rpm. Unplugging the system fan caused NO change. I think that...

I am having some type of driver conflicts with my Nvidia Geforce 4 MX440 card and some conflicts with my onboard sound making background noises while attempting to play DVD's. I have the latest bios and drivers installed. Has anyone else had these problems and possibly found a solution. Thanks in...

Helping my b-inlaw build a new system, 7N400 Pro2 MB, Barton 2500, 512 Centex PC2700, 2 WD 160GB HD's for RAID. Upon assembly and first boot when checking the BIOS settings the FSB reads at 200MHZ with the option to adjust to 100, 133, 166, but I didn't see a multiplier setting like on my...

I have a 7N400 Pro 2, AMD XP 2400 and 2 x 512MB 400 (PC3200) DDR branded memory. Problem is that I cannot get this spread to work with both memory banks in place. With them in 1 & 3 the board fails to boot and gives a steady slow pulsed beep. With them in 1 & 2 the system will boot up ok and start...

Hi there everyone, I am very very new to this group as I only got my computer put together in the last couple of days with a Gigabyte 7N400Pro and an Athlon XP2700. My friend who built my machine has the same setup and his worked fine straight away. Mine, on boot up, recognises the CPU as an...

Has anyone noticed that the native XP system drives get you into the OS very quickly, but when you put the native nVidia drivers on, it slows the boot time by a factor of 2 to 3 times? Does anyone know why this happens? I have rebuild my system several times (not to correct this problem), and I...

Hi, I have just put together a GA-7N400 Pro system with 2x512MB RAM, 2x80GB WD RAID drives, 10 GB application drive, MSI FX5200, Termaltake 420W power. No overclocking. I think I have all the latest drivers and bios. Sometimes one I access different applications it will just reboot. No...

This is my second board that's exhibiting the same symptoms, so I've decided that it must be me. I have a Barton 2500+ processor and 256MB DDR. The CPU and chipset fans power up and the DIMM light is lit when I press the Power button. But there are no beeps at all. Have tried the board in/out of...

Greetings, For the first time since this board went into service last January a BSOD came up near the end of a Quicken 2005 install.. This was a real surprise as this board and XP Home have been nearly flawless performers.. The error screen announced "DRIVER_IRQL_NOT_LESS_OR_EQUAL Then STOP:...

What are the most up to date drivers for this board. My Dvd burning has some issues due to the buffers not staying full through the entire burn. My dma is enabled and I am running Windows 2000 Pro. Thanks in advance, Phil

Help!!! What are the proper settings of the dip switches and BIOS settings to get the MB to recognize the 2800+ instead of the 1250mhz I'm getting now. TIA

This MB was originally set up using only the pri and sec IDE channels. PriM 80gb HD, PriS 80gb HD, SecM CDRW and SecS iomega zip 250. I now want to add a DVD player. What would be the easiest way to configure all hardware? Put both HD on a raid and use the CD,DVD and zip on the IDE channels? Would...