|
|
Switch from 8INXP to 8KNXP by
Boudewijn
Hello,
Yes!
Regards, Boudewijn
"Torben Hansen" wrote in message
...
Hi,
do I need to reinstall Windows XP if i change my mainboard from 8INXP
|
|
4 |
709 |
|
|
GA-8KNXP LAN Speed problem... by
[email protected]
Hello,
Has anyone else noticed a problem with the onboard "Intel
Pro/1000 CT Desktop" ethernet controller only detecting a 10 MB
network, even if you're on a 100 MB network? This problem is driving
me insane. I've already tried flashing the BIOS and updating the
drivers, and the problem...
( 1 2)
|
|
17 |
617 |
|
|
HDD Led indicator Stays on Constantly by
Gary Seven
On Wed, 23 Jul 2003 18:27:47 -0400, Gary Seven
wrote:
I have a GA-8IK1100, with a Pacific Digital DVD rom on it. The HDD
LED stays on constantly. I upgraded the BIOS to F6 with no problems
and no change. Is there anything I can do?
OK, I seem to have fixed...
|
|
0 |
643 |
|
|
7N400 Pro by
Fred Klingenmeier
I am having problems with the temp and fan sensors. As indicated in
EasyTune 4 my system temp is 38 C and the CPU temp is 32 C?!? The CPU fan
is correct. I have a manual adjustment. The system fan shows 2116 rpm and
the power fan 0 rpm. Unplugging the system fan caused NO change. I think
that...
|
|
1 |
331 |
|
|
GA-7ZXE by
Fen Lad
Does anyone know if this board enables "memory interleaving" by default
please?
Tried to ask Gigabyte via their website technical response form but it
won't send the form.
|
|
2 |
338 |
|
|
Memory Interleaving by
Fen Lad
Gigabyte GA-7ZXE board, does this enable "memory interleaving" by default?
Nothing in the manual and the form of Gigabytes doesn't send.
Appreciate any input.
|
|
1 |
359 |
|
|
8KNXP Bios F6f SCSIr strange problem by
Aleph
I've flashed the BIOS with F6f version wich activate Raid function with
SCSI, and now, I have no access to dual Bios : pressing F8 in setup brings
me to black screen an floppy light on... Is there anyone with the same
problem ?
|
|
5 |
427 |
|
|
8KNXP & memory issues... HELP! by
modem
My issues are pretty straight forward. When i orginially got my 8KNXP
motherboard I got two generic DDR400 sticks of ram that gave me
issues. Both were identical, but only 1 stick would actually boot the
system at all. The second stick gave fast, repetitive beeps nonstop.
The stick that did boot...
|
July 24th 03 04:56 PM
by modem
|
5 |
704 |
|
|
G A-8PE667 Newbie by
TMTupper
I bought this board used, I have never tried Gigabyte before. I was a little
confused when the system booted up and said Ram 266, when I have DDR 333 on
the board, I could not figure out if i could change it.
A friend said that the CPU I was using, a 400mhz FSB, will not allow the ram
to run at...
|
|
2 |
556 |
|
|
Power Supply always on KNXP by
James Barker
I bought a enermax whisper quiet 460 a week ago and installed it on a
new 8KNXP. Here's the deal; when i turn ps power on, the cpu, fans, cd,
etc turns on and and will run continuously. This is before the power
switch on the case is hit. When the power switch is hit, the mb powers
up and the system...
|
|
1 |
713 |
|
|
GA-7DRX with AMD XP 2600+ FSB 333 by
ok
that board is either 100 or 133 no 166 on it
"NuT CrAcKeR" wrote in message
...
check your FSB... sounds like you are running at 133 instead of 166.
NuTs
"ok" wrote in message
...
|
July 25th 03 02:40 AM
by ok
|
0 |
373 |
|
|
GA-7NNXP by
Ros Vicente
Does anyone have any problem with the above model?
If so... Please advise. I am planning on buying one.
Any response would be greatly appreciated.
Thanks in advance.
|
|
0 |
364 |
|
|
8KNXP and Intel Application Accelerator by
Greg
Is anyone using Intel Application Accelerator with the 8KNXP? I have read
elsewhere that people had it installed so I went to Intel to download it and
their page says the 875p is not compatible with it. My system is running
fine without it, should I install it, if so what version?...
|
|
3 |
500 |
|
|
|
|
1 |
388 |
|
|
Help needed for a dumbo by
Sam Kekavitch
I have problems with my computer that are not related to the hard disk.
Machine has Gigabyte GA 8ST667 motherboard. Pentium 4. It was smoothly
running XP until my son turned it on yesterday. He couldn't log on. I have
checked everything I can think of with the hard disk including putting it...
|
|
9 |
656 |
|
|
Large (250GB) drive with GA-81EXP by
AlanLS
I can't get this to work properly. It seems to be picked up in the BIOS,
and appears in the device manager but not as a drive letter. I have WXP
with SP1 and it should work. Does anyone know if large drives are supported
by this board.
Thanks
Alan LS
|
July 25th 03 08:55 PM
by AlanLS
|
2 |
439 |
|
|
2600 XP running at 1262 on a GA-7VAXP Ultra? by
John Constable
I've run some diagnostic utilities and they report my CPU (2600
thoroughbred) to be running at 1262. My bios says (my FSB?) speed is 100. I
tried to change it to 166 and it failed to boot (rebooted on its own with
setting changed back to 100)
My questions:
1) can some recommend a good diagnostic...
|
|
3 |
487 |
|
|
8KNXP: VCore=Fail by
Musk
I've noticed this message on the system health screen in bios. What exactly
does this mean and is it a problem? I ask because it's always shown this,
and yet i've been using my new system with this mobo for 6 weeks with no
problems. Everything works great from the latest games to video and...
|
July 26th 03 02:26 AM
by Musk
|
0 |
449 |
|
|
GA-7VAXP Ultra Chipset Fan Noise by
The Maxx
My GA-7VAXP Ultra Chipset fan has started being really noisy. I took it off
and cleaned it out and that seemed to help a bit because it was clogged with
dust and dirt, but it's still really loud. There are times when it will
eventually calm down, but most days it just stays really noisy.
I'm...
|
July 26th 03 02:33 AM
by Jeff
|
3 |
348 |
|
|
GA-7ZXE wrong CPU temperature? by
llywiwr
GA-7ZXE
When I boot up from cold with a room temperature of about 25 deg. C. my CPU
temperature immediately shows as 35 degrees. Is this a fault with this
board?
|
|
1 |
963 |