I am running W2K and a Abot KT7A mb. The board sees the floppy at boot, and W2K sees the floppy as well. I can not format any disks - is this a bios problem or a W2K problem? I think something is messed up in a configuration somewhere. Thank you

i am interested in IS7-E and IS-10 which one do u suggest?any experience on those 2? any comments? thank u

Hello, Does anyone know if there is a list of motherboards with the failing capacitor problem? I believe I have to motherboards that have that problem and need to know what I need to do about it and if I can get it fixed by abit for free or if it will cost me a lot. Thanks Marcus Hilderbrand

hi, i want to make a pc for my daughter. got myself a SE6 and a matrox g-400marvel when i install w98se the system restarts everytime it's at the point of updating the drivers (searches for p&p moonitors and ................restarts) anyone got an idea what could be wrong?

I've just tried the AIDA32 (http://www.aida32.hu/aida-download.php?bit=32) and it gave me a really bad benchmark on memory read/write. Only 549MB/s on write and 1757 MB/s on read. My pc has 512 MB RAM 2100 and a XP2400+ Is it just a memory problem or could it be something else, like aida32 being a...

Hello, I'm not 100% sure it's the motherboard but I have an AT7 motherboard that has been running for about 18 months and now my computer is crashing all the time with a windows XP error message of "Hardware Malfunction" and I am as yet unsure if it is actually my motherboard that is causing the...

What will work as upgrade?

the manual says you can use DMM400 (PC3200) memory in a KD7 (not KD7A) Motherboard. anyone using this and is it stable? I understand you can only use two memory sticks... is the max 512MB?

Greetings: Here is my config: Asus A7v266e Athlon XP1800 1 Gig Crucial PC3200 DDR (2x512) WD 120GB ("C" Drive) Seagate 40GBn ("D" Drive) MSI TI4200 128mb Graphics Card

please direct me to some info on what to do. I have 5 pieces of BE6 II that are bought in 1999 with the green bulging capacitors that will not boot. ( the RAID version boards ver.2 are fine) what to do?? is there someone changing the caps? or am I mistaken in seeing this as the source of the dead...

Hello, does USB2 works with the motherboard BX6 V2 ? Regards

I have an Abit KT7/KT-RAID motherboard which I purchased three years ago. Last July, my system shut down for no reason at all. When I tried booting up the system, it would turn on but the Operating System would load. I'm still having this problem, but what I need to do is turn off my system, unplug...

:)

TURN TWELVE DOLLARS INTO THOUSANDS EASILY AND HONESTLY!!!! THIS MESSAGE WILL CHANGE YOUR LIFE FOREVER!!!! --- I found a message similar to this one on a bulletin board recently and decided to give it a shot... A little while ago, as I was browsing through message boards like you are now, I came...

TURN TWELVE DOLLARS INTO THOUSANDS EASILY AND HONESTLY!!!! THIS MESSAGE WILL CHANGE YOUR LIFE FOREVER!!!! --- I found a message similar to this one on a bulletin board recently and decided to give it a shot... A little while ago, as I was browsing through message boards like you are now, I came...

Hi, I have built a new system and am having a bad time getting BOTH (there are only two dimm slots) on this board to work. I have replaced the board once already. Both boards exhibit the same behaviour. It will only recognize ram in the first slot. If modules are placed in both the slots the...

Anyone have any ideas on a decent board to buy for a family computer. All it would be used for is the internet basically. So it doesnt need to be full of any specs or anything., Thanks - Mike

I have been trying to build a new system for gaming. I have a NF7-S V.2 With the latest BIOS which I just flashed. I have a ATI 9600 XT AGP 8X Video card and Kingston 512 MB PC 3200 Ram in Dimms 3 and 2. Eveytime I boot up I get all the way to windows is checking your hadware configuration, As I...

I want to switch out a 450 PIII for a 1.1Ghz Celeron (Coppermine)100mhz,bus speed. using an ABIT Slotket adaptor. The slotket adaptor has no instructions. I found it on Ebay. Does anyone know how to configure it and if it will conflict with the other items. Abit has no information on their Web...