|
|
Mainboard - AH6 and 40 GH Seagate ST340015A by
Mitch
Hi,
I've been trying to install a 40 GB Seagate ST340015A Ultra ATA100
drive on a system with the AH6, KQ BIOS. The BIOS on the ABit board
won't even see it. I flashed the ABit BIOS and it didn't help
anything.
My question is: is there another flash from ABit I can use to get
this
thing to work?
|
July 5th 03 08:34 PM
by Mitch
|
0 |
1,345 |
|
|
KX7-333R Processor speeds by
Leonardo Vitis
You can use any AMD cpu on the market at the moment
Only problem is that Bios does not recognize them, so you have to set them
manually
333 FSB works without a problem on this board
Im running an XP1700 Tbreb @ XP2200+ (166x11)
Cheers
"Dave" wrote in...
|
|
0 |
1,371 |
|
|
BIOS Problems by
LrT
Try taking the ram out and booting.
Of course it shouldn't boot.
But then turn it all off, and put ram back in. See if it resets itself
to 266.
Or you may have a bad bios. Maybe you could re-flash it.
But that may cause more problems if it fails to flash.
Maybe put a different stick of ram in...
|
July 8th 03 08:36 PM
by LrT
|
0 |
1,568 |
|
|
ABit BH6- no boot by
skee
Need input on where to go next. Power supply in PC crapped out, replaced
with a new one of equal wattage. After turn on, machine will not boot, black
screen. Pulled all boards except video card, no boot. Substituted
different videocard, nothing. Tried a different CPU & different ram,
nothing....
|
July 8th 03 11:02 PM
by skee
|
0 |
1,457 |
|
|
overclocking kt133a with and xp2100 by
laredo
Hello,
i have this motherboard and a amd xp 2100, by default it is works at 2000
mhz, 100 Mhz fsb and very stable. The problem is that i have a msi ti4200,
and the system has becomes very inestable, reboot every 4 minutes, with the
gforce2 work very fine. I try with the old amd xp 1600, and there...
|
July 9th 03 09:28 PM
by laredo
|
0 |
1,425 |
|
|
problem with nf7 v2.0, 200fsb, 2 sticks ram by
Geoff
specs to start with
xp2500 (1.833ghz normal speed)
2 x 512pc3200 twinmos m-tec ram
nf7s v2.0
running at default values for bios apart from:
200mhz fsb x 9 (for 1.8ghz)
prime95 fails with 1 stick of the above ram in the double dimm slots
|
|
5 |
1,718 |
|
|
Stupid Power Supply Question by
RHD
Hi,
I am building a new computer, IS7 - 2.4C ...its been a while.
I have a brand new P4 power supply with the main power connector and the
seperate 4 prong plug.
My old PSU doesn't have the 4 pronger.
My question is:
|
July 10th 03 02:28 AM
by RHD
|
0 |
1,815 |
|
|
Warning help by
David G Misner
Warning!!! DDR Dimm modules should be set from DIMM4
to DIMM1 by order!!!
What does that mean???
( 1 2)
|
July 10th 03 03:07 AM
by 0_Qed
|
14 |
2,530 |
|
|
AT7-MAX 2 won't power on by
Weeble
I recently built a computer for my flatmate. I've built a few
computers before, and don't think I've made any particular oversights.
Before I describe the failure, here's the specs:
ABIT AT7-MAX 2 motherboard
Athlon 2600+ XP
2x 512Mb PC333 RAM
ABIT GeForce4 Siluro FX5800 with 128Mb RAM
Plus a...
|
July 10th 03 05:27 PM
by Weeble
|
0 |
1,657 |
|
|
BH6 by
Raul Hormel
This is a great motherboard! Now at 1.4 ghz with PowerLeap!
Anyone else have this combo?
Hopeufully it won't fry my caps!!
laters,
Raul
|
|
0 |
1,468 |
|
|
KD7-S fails to boot to POST by
Ian
I have just bought a Abit KD7-S, PC2700 memory(512MB) Gainward GeForce
FX5200 graphics card, 450W PSU and AMD XP2600+ FSB333 processor.
The only time I get to the POST screen, ie the monitor light is green,
not orange) is when I erase the BIOS. It comes up with several
messages :
"Processor...
|
|
1 |
1,639 |
|
|
BH6 and 256 MB Ram by
jan
Hi,
I bought a Kingston 256 Mb Ram (133) but my BH6 only counts up to 128. Any
Ideas?
Thanks
Jan
|
July 12th 03 10:09 PM
by Z28
|
3 |
1,344 |
|
|
New mobo for XP CPU - which one? by
Devast8or
Hi all,
I'm thinking about buying a new motherboard, and wanted to hear if you guys
have any good suggestions. It doesn't have to be Abit, but I've been very
happy about my KT7A-RAID and BH6 boards.
My needs a
1) Sockat A (I have a Palomino 2000+ I wanna put inthere)
2) Room for a Silent...
|
|
0 |
1,385 |
|
|
NF7-S and cd rom problem by
Larry
Is ASPI installed
On Sun, 13 Jul 2003 14:58:11 +0100, "venom"
wrote:
I have just installed a 52x24x52 liteon re-writer to my system, the problem
is ,that the bios is saying that it's there but when windows starts there is
nothing there, I have been into devise manager but...
|
|
1 |
1,323 |
|
|
problem with ic7 max advance 2 by
SirWoofAlot
maxtor, ofcourse....been harvesting ebay for 200gig 7200rpm ata133 hd
kits(don't care for the promise card it comes with, going to get siig
addon cards instead, but the kits offer better protection of the hd
than other hd deals on ebay)
On Mon, 14 Jul 2003 00:34:06 +0200, "Jens C. Hansen...
|
|
0 |
1,442 |
|
|
NF7-s HELP by
Andrew MacPherson
In article ,
(Peter Sørensen) wrote:
I've just purcased a nf7-s motherborad, when i boot the pc the only
thing that happens is that the speaker beeps every 2-3 second
Tried holding "insert" down during reboot? That usually forces it...
|
|
0 |
1,086 |
|
|
IC7-G 800MHz settings? by
Patrick Mc
By default the correct FSB will be set by the bios
Patrick
"TG" wrote in message
...
So I finally got the hotsie-totsie board to load and be stable, but how do
I
take advantage of the 800MHz FSB I paid extra for? I don't...
|
|
0 |
973 |
|
|
be6-ii help by
alan smithey
Hi,
Just got back from vacation and went to boot up an old machine with a BE6-II
mother board.
First it made an alarm sound. I checked to make sure the voltage wasn't set
to 200 and it wasn't. I tried removing the RAM and that had no affect. I
finally ended up fiddling with the ribbon cable to the...
|
July 15th 03 06:07 PM
by anders
|
5 |
1,189 |
|
|
NF7-M Sound Connetcions by
Keith Drengler
Just bought an NF7-M board. Looking at the instruction manual, it seems that
there is only one audio connection on the motherboard to connect an optical
device. I plan on putting in separate CD-RW and DVD drives (salvage from
another system). Is there any way to hook both up so that sound can...
|
|
0 |
935 |
|
|
NF7-M Sound driver by
zoab
As I understand the manual when I load the drivers I am meant to get
an additional icon in my control panel for sound. I have loaded my
unified driver ver 2.41 from the Nvidia website and alas no icon.
I then loaded the drivers from the cd as advised by my motherboard
supplier which I have done and...
|
July 16th 03 09:01 PM
by Don
|
1 |
962 |