|
|
Nikon LS-2000 scans look like a bad soft filter was used on the photo by
Jay
My LS-2000 scans are turning out really bad. It looks like the photo
was taken with a really crappy soft filter. Here's an example:
http://www.birdus.com/badscan.jpg
This slide is an excellent quality, very sharp image when viewed on my
light box. The difference between the slide on the light box...
|
October 25th 04 07:13 PM
by Jay
|
7 |
543 |
|
|
win2000 driver for HP photosmart c5100 by
OldRelayer
This is a fairly old scanner, I can't even find anything about it on
HP's site. But I have one and it still works great. I run a dual
boot only because I haven't been able to find a win2000 driver or
program for this scanner. Any ideas? I am rebuilding a system and
would really like to just use...
|
October 25th 04 06:21 PM
by emef
|
4 |
481 |
|
|
snagged a SCSI MicrotekIIHR off of ebay by
ProdigySBC_SUX
I bought this thing in a lot of printers and want to get it going because it
has a feeder for docs to be scanned.
It is a SCSI scanner but did not come with a SCSI card. I am thinking that
the drivers for this scanner will be looking for **EXACTLY** the SCSI card
that shipped with this scanner. ...
|
|
1 |
170 |
|
|
|
October 22nd 04 05:39 PM
by RSD99
|
4 |
693 |
|
|
Focus issues with Polaroid 120 and SF ? by
frankg
Q: Is there a known issue with SF Ai focusing the Polaroid 120 scanner? I
cant get an answer out of SF or their forum
I'm not consistantly getting good sharp scans. I cant establish a
pattern to the behaviour. The negs are pin sharp through a loupe but
scan soft. I know I have to apply sharpening...
|
|
1 |
312 |
|
|
GT-30000 by
Christian Schmitz
Hello,
i am using a Epson GT-30000, but have a little problem with it.
After scanning some lines it stops, drives back, and scans again. It works
fine, when i scan with 600dpi.
It is connected with a Adaptec 160MB/s SCSI card to a P4 with W2K.
Any ideas?
Regard,
Christian Schmitz
|
|
7 |
318 |
|
|
Pro 2006 LED S Meter Mod by
Bo Harris
I used to have a mod book for my Pro-2006 scanner. I installed the LED
S Meter mod, but i had to remove it because of sending the radio in for
warranty work (which i drilled and installed 5 red and 5 green LEDs on
the front) I cannot find my book and i have had this disconnected for a
couple of...
|
|
2 |
439 |
|
|
Stepper Motor for Mustek A3 USB by
Kimba W. Lion
I have a Mustek A3 USB scanner in which the stepper motor has gone bad.
Mustek says they don't sell spare parts for their scanners.
The motor has Japanese writing on the label, plus the numbers T1434805 and
24051014.
Can anyone recommend a source for a replacement?
Thanks.
|
|
3 |
429 |
|
|
Canon IX 4025 by
ronny
Hi.
I have an old Canon IX 4025 with
scsi card Adaptec 2904 and I want to run it with
Windows Xp.
Canon dont make driver to the scanner for Xp.
If some people have this material, can they tell
me what I can do.
Thanks.
|
October 19th 04 02:20 PM
by CSM1
|
1 |
275 |
|
|
Scanner for dental x-rays. I need some advice, plaese! by
Costas Soros
Hi everybody!
I'm interested in bying a scanner for digitizing intraoral dental x-rays
(dimensions: 40mm x 30mm). Normally a film/slide scanner would do the
job, however the dimensions of an intraoral film are slightly bigger
than those of slide (35mm, right?). If it were not for this, I would
have...
|
|
3 |
467 |
|
|
Wavelength response for Epson scanners by
Bob Jordan
I wonder if anybody in this forum is aware of any published data on the
sort of wavelength response that one might expect from an Epson
Perfection 2400 photo scanner. I know it is a long way from the CIE XYZ
curves and I do understand the design reasons for using non-CIE curves
to scan three...
|
|
0 |
418 |
|
|
LS-1000 & XP by
K Michael
I have an Nikon LS-1000 scanner with an Adaptec AHA-2920A SCSI adapter. The
software I am trying to use is Vuescan with the Adaptec ASPI driver loaded
on Windows XP. Unfortunately Vuescan does not see the scanner. As a side
note all this works fine on my Win 98 setup. Has anyone had any...
|
|
1 |
277 |
|
|
|
October 15th 04 04:55 PM
by notme
|
0 |
444 |
|
|
Calibrating help appreciated!! by
Zaphod
Hi
Have a USB scanner, Dell TFT monitor and Epson R300 printer, running XP Home
SP2
I would like to get the calibration as near as possible for the scanner,
monitor and printer, so that what I scan is shown identically on the screen
and what is printed looks like what I see on my screen. I use...
|
October 15th 04 02:55 AM
by me
|
3 |
557 |
|
|
Scanner software? by
AlCamp
I have an Epson 1660 Perfection Scanner running Twain via USB 2.0.
The scanner may be "Perfection", but the software certainly isn't! While I
have a "one button" copy feature on the scanner, the software won't allow
for customizing the "default" copy settings. (Color/BW, Darkness, Pic/Text,
etc..)...
( 1 2)
|
October 13th 04 10:17 PM
by Chris
|
12 |
857 |
|
|
epson 4180 by
Random Electron
Hi,
I bought one of these units to replace a cheepie. After installing it, I
examined the results from it. I found it to be flat - no good saturation. I
played with its myriad of settings, including, professional but could not
coerce it to give good saturation or contrast.
As an advanced amateur,...
|
October 12th 04 01:50 PM
by -
|
1 |
297 |
|
|
EpsonScan Slide Recognition/Scanning Questions by
Mark
Just got Epson Perfection 4180 and have some slides to start out with.
Quality isn't that bad, but speed is. Has anyone had any luck getting Epson
Scan to recognize slides in Auto or is Professional mode the only choice.
Is there any way to bypass or automate the preview. I don't really want...
|
October 11th 04 03:58 AM
by Mark
|
0 |
327 |
|
|
Epson Perfection 4180 / Service Pack 2 Conflict? by
Mark
I was about to purchase an Epson 4180 scanner this evening but, when I
mentioned I had installed the XP SP2 upgrade, the salesman recommended
holding off until I verified whether there were any compatibility issues.
Nothing on Epson's site. Anyone using the 4180 with SP2?
|
October 11th 04 12:00 AM
by Mark
|
2 |
469 |
|
|
Epson Smart Panel question by
AlCamp
I have an Epson Perfection 1660 scanner with Smart Panel V2.5
I have the COPY function set up as the default action to take when I press
"Go" button on my scanner.
I'd like to set up my COPY setup for Defaults to B/W and Text.
But, every time I go into COPY on the Smart Panel, it's always set up...
|
October 10th 04 06:16 PM
by RSD99
|
3 |
1,064 |
|
|
Problem with Minolta Scan Elite 5400 using Vuescan by
Colin Ackerman
I have just paid for Vuescan to use with the 5400 scanner. I have just tried
to scan some mounted slides (using the mounted slide holder that came with
the scanner) and they have all scanned out of focus. If I scan unmounted
film using the unmounted film strip holder (supplied with the scanner)...
|
|
0 |
966 |