Flame me if this is the wrong group!!! I have a Gigabyte GA-K8N Pro - SLi motherboard with 2 x 512mb Crucial Ballistix memory. I want to upgrade to 2GB of memory, but instead of putting in 4x512, to which i hear knocks the memory back to 333mhz i will be going to 2x1gb. If this is the case then I...

Are there any known problems with this board??? Josoap

Intel 815 AGPSet BIOS for 6OXE F6 AWARD BIOS This quit working week ago tried other agp cards that are good, but nothing (comes up with pci) can load an pci nvida card but not any agp cards!bios says it there but nvida drivers says no nvida found!!! well any fixes would be great. after three heart...

There's an option in bios for robust graphics booster and you can set it to auto, fast or turbo. Did anyone try playing with this, is there any diference ?

I would like to know what you are seeing in your BIOS under Voltage/frequency Memory Frequency for Do you see choices auto, 2.0, 1.6, 1.33 or only auto and 2.0? Please include the FSB speed of your CPU (400, 533, or 800) and if P4 or Celeron.

Hi All I have a 81G1000 motherboard and have used up all my IDE spots - 2 x HDs ( 1 x 120 gig 1x 180 gig) and 2 x DVD Writers - and I need more HD space for video editing 1. Can I fit SATA drives now, as well as all those IDE devices? 2. Is it better for me to buy a PCI card that will give me...

My two 512 MB sticks of Corsair memory don't work on this mobo at 200 MHz. BIOS shows 166 MHz. When I use a single stick I get the full speed. I cannot set the speed in the BIOS, since the clock speed for DDRAM is grayed out. When I set it via EazyTune it does not keep that value. How can I set...

I have found that some people have had success using third party programs, mainly ClockGen, to overclock their GA-K8N Pro SLI. In ClockGen, for me, I went into the BIOS first and set the CPU down to x6 and the memory down to 100 speed. Boot into Windows and run Clockgen and it freezes if I try to...

I need to know the diagnostic beep resulsts for the mobo. It's issuing 1 long + 3 short beeps on boot up. The manual doesn't have a section on this. Can anyone help? DebB

I have a system with a GA-6BA motherboard in it. I recently put Windows XP on the system and since then there have been some system crashes when using a dialup connection to the internet. The system will work fine when not connected to the internet and for varying amounts of time when connected...

"Skybuck Flying" I am probably going to set the pc on the ground so a build in front end panel is unhandy for me, the rack is much more handy and nice since it can be placed on the desk providing easy access to all the nice rotary controls =D I suggest you put the pc on a small stand...

When I got this mobo it originally came with BIOS F6 and everything seemed to work fine but when I upgraded to either F8 or F9b I ran into numerous problems. #1 the CMOs setting keeps resetting. If my CPU was overclocked, sometimes it'd revert to default speed and once it claimed I had 2.0GHz P4...

Hi, Anyone else had crazy temp readings with EasyTune5? The old version 4 works ok, but I wanted to try the new one. I use a 7VT600-RZ mobo, maybe it's not compatible with new EasyTune? Does anyone know? Example problem is system temp reading 90c (instead of 33)!

smurfomatic Wrote: "Reckless" wrote in message ...- Hello, "Richard Dower" wrote in message ...- I have the 8INXP and if memory serves there...

Somehow I can't get my GA8KNXP to recognize the Hitachi/Deskstar on IDE3. Is there something I am missing. Works fine on IDE1 and IDE2 Any advice Thanks

Hi Having problems with my GA-8IK1100. I start the PC up and everything goes fine then after about 3 or 4 minutes my mouse freezes and my keyboard refuses to work at the same time. Both these work fine on my old PC. I've rebooted with different BIOS settings and I get the "keyboard not present"...

Has anyone had a problem with the 7vt600-l and XP2700+? I can't seem to get windows XP to finish installing before I get blue screen with the message: A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL There is some other...

Following on from a few previous posts I made in this group regarding high idle CPU temperatures with the 7N400 series (7N400-L rev. 2 in my case) due to the lack of a working "S2K bus disconnect" feature in the BIOS, and having had no success with Vcool in improving the situation, I finally got...

Hi there.. I hope you can help my friend. He has a Gigabyte GA-7ZXE motherboard and is suffering random reboots. Initially I thought it had something to do with heat - the longer it was left off (eg. Overnight) the longer it lasted when it rebooted. However the CPU Temp is quite stable around 50c....

Hi folks, brand new 8knxp that I started up for the first time. It gave me a message about not being able to read a boot disk which is fine because I hadn't loaded an os yet. Powered off and came back the next day. Not sure what has happened but now each time I boot I don't even get past the...