I picked up this motherboard today and installed it. I also got some Kingston CL3 PC-3200 memory (2x512) running in dual channel mode and a P4 2.8GHz Northwood "C" processor. Everything went well and everything works. However, I have three questions/concerns... I have not re-installed Windows,...

I did this backup when I first installed Vista with all of the drivers & updates installed. I booted from the mb disk, backed up, and all went fine...or so it appeared. Today I decided to test it by hitting "F9" while in the POST screen. Nothing happened. Tried it again, and again. F9 does...

I have an 8KNXP Rev 1 board, and am having trouble setting up my desired combination of drives. I don't use RAID. I have: 1 x 80Gb SATA drive (boot drive) 1 x 40Gb PATA drive (used for data backup) 2 x optical drives (CD-RW & DVD-RW) And I've just added:

Gigabyte MA790X-UD4 and Athlon Phenom II, Windows XP Pro 64 bit. I built the system last night, everything went well, no problems during assembly, it booted right up and I installed the OS. This morning I installed various software programs, went online, all was working well. It wouldn't...

Hi All. I have been asked to build a system for friend, mostly for his kids schoolwork, games. internet etc. I Am thinking of using an Athlon 2.4gig, can anyone recommend a Gigabyte Motherboard £60-80, (haven't used gigabyte for a while) plus a Graphics card not to expensive £50-60 any...

For the second time, my EP45-UD3P has lost it's MAC addresses. This occurred most recently after a windstorm caused power outage. By flashing the BIOS with the QFLASH utility in the BIOS setup and unchecking the option to keep DMI data, then loading BIOS defaults, they came back. Solution was...

i've installed sata OS disks with winXP before, but this is a new kind of sata problem. motherboard: Gigabyte GA-K8NXP-SLI , 36GB raptor boot disk (no other hard drives), XP pro with SP2. ok, the cd booted ok, installed the SATA controller (from Sil3114 folder) after hitting F6... XP install...

Just curious if there was anyone in Australia that had one of these for sale, preferably in Sydney? Perhaps have one left-over from a set-up where you didn't need to install it. If you do, please drop me an email. I need one for my 8S651M-RZ Only found a couple of online retailers in Australia,...

After having a drive of a RAID 0 go bad on me and giving SMART errors (as seen during boot with the intel RAID), and after rebuilding the system several times over a few months (yes, I had backups :-)), I received a replacement drive. I then decided to install the two SATA drives without a RAID...

I've a motherboard GA-G31M-ES2L(rev. 1.x) and a Pentium 4 / celeron with 533 mhz Fsb (Pentium 4 - 524- SL8ZZ) unfortunatelly, it seem they are not compatible http://www.gigabyte.com.tw/Support/Motherboard/CPUSupport_List.aspx?ProductID=2889 http://www.cpu-world.com/sspec/SL/SL8ZZ.html I'm...

Thanks, That is what I have. I do boot off SATA ok, but only if the 2nd disc (IDE) is plugged into the ITE & it is configured as non RAID (the manual says 'ATA' I think). However, the thing that doesn't work is if you have an IDE disc in the standard Primary Channel but want to boot of the SATA...

I'm hoping someone can assist with a booting issue that I have with my IHXP. I am currently running XP Pro off of a raid 0 array on the on-board promise controller. It works fine. I also have an Adaptec 29160 with a scsi drive attached with an install of win98 and MDK9.1. WHen I boot to XP, it...

I have a GA-8IHXP (Rev 3.0) mobo with a Promise FastTrak TX2000 RAID card and Adaptec 19160 Ultra 160 SCSI card installed, and a Seagate 36GB Ultra160 hard drive hooked to the Adaptec card. For some reason, the mobo will hang when booting into WinXP when both these cards are installed. Whenever...

BANG! Maailmankaikkeuden historia./Neutriino. Neutriinot ovat pieniä ja hyvin kevyitä hiukkasia. Niitä syntyy ydinfuusiossa, jotka toimivat tähtien (esimerkiksi Auringon, perusydinvoimalan) energian lähteinä. Useiden vuosien ajan neutriinojen oletettiin olevan massattomia, mutta nykyään tiedetään...

Manual says to punch CTRL+F1 to get into advanced settings. Tried this durring and after POST, and while looking at the BIOS menu screen (the one you get by hitting DEL during POST), with no effect. Using BIOS version F6. What am I doing wrong?? Also, is there a way to disable APM on this...

My setup's problem(s) I traced to one of the KVR400X64C3AK2/1G pairs. Originally, I had two KVR400X64C3AK2/1G installed in DIMM slots 1, 2, 4, & 5. I experienced errors during installation from CD. Ntoskrnl.exe problems on boot, and multiple forms of BSOD. I finally decided to remove 3 of the 4...

Have a old Gigabyte board here that is version 1.1 of the BX2000 (not the plus version). Reading the installation guides, it says that you can set the dip switches up to 133 MHz and 9.5x multiplier and that equates to a 1.26 GHz Slot 1 Pentium. However, they say it will only take up to a 650 MHz...

i have a gigabyte GA-7DPXDW-P motherboard, and recently enabled the on-board promise controller in ATA mode. now i'm unable to do a cold boot, unless i: - remove the cmos battery and unplug the PS, resetting cmos - then i can boot, but CMOS is wrong, so i have to go into cmos, change settings,...

sounds like you need to check if your mobo support that size drive and if you have the newest bios Don't crosspost to 6 newsgroups! Wayne "Milleniumaire" wrote in message ... I have just installed a new Seagate...

System runs Ubuntu and Windows XP SP3. Sound is fine under Ubuntu but does not work at all under Windows. I have tried loading and reloading Windows drivers to no avail. At present, Device Manger shows: ATI Function Driver for HD Audio - ATI791A Audio Codecs Audio Device on HD Audio Bus etc. If...