Please, can somebody help me with this ? Gigabyte GA-7VRXP + AMD XP2400 + 2 x 256 Mb DDR2700. The above runs various versions of DOS, from either floppy or hard drive (60 Gb Seagate), fine - no problem at all. If I try to install Windows 2000 it all seems to be going well until I get to the point...

Has anyone else had any problems or success with the above combination ? Installing Win2K from the command line using \i386\WINNT. Goes through all the file copying okay and re-boots to start Win2000. Blue screen (not BSOD) title: 'Windows 2000 Setup' and message 'Setup is starting Windows...

When attempting to install WindowsXP it hangs during the first "starting windows" which occurs right after the first files are copied. So far I have tried disabling all onboard devices, different memory, and installing the raid drivers even though my harddisk isn't on the RAID. Any ideas?

Hello, I'm having a problem with the onboard sound. (Creative CT5880) I'm running Windows XP PRO with a NVidia GTX Video Card. I downloaded and installed the 5.12.01.4113 Creative drivers off of Gigabyte's site. I've just updated video drivers off Nvidia's site. The problem is that when any kind...

Hi all Can anyone help me please? I am trying to convert one of the U320 connectors on the GA-8KNXP Ultra motherboard to a 50pin to connect my CD-R, Jazz etc cable but I am getting confused. I keep ending up with either all female or male adaptors which don't fit. Can anyone please point me in...

Hi All Can anyone help me with this problem? I have the MB board installed and am able to configure the BIOS. I have a DVD drive connected as a slave to the RED PATA IDE channel 1 connector that works fine. If I connect a Hard drive as Master to the RED PATA IDE connector it

Early in the boot sequence this screen appears: Gigabyte Technology: PCI Express to SATA II HOST Controller ROM V1.07.16C Detecting Drives; Done; No Drives Found The systems works great. I'm running a single SATA II, no RAID. The HDD is connected to one of the SATA II ports. BIOS F2.

I have an Antec P180 case with this mobo, and I'm stumped. The Antec P180 front panel wiring for the Pwr, LED, Reset (etc) are not marked plus and minus. Is the white wire plus, or is the colored wire plus on those leads. I know this is really an Antec question, but that manual sucks, so I'm...

I have a 2.4 CPU and tried setting it to 2.6 by moving it up to 220 from the 200 default (200x12)...that set off a loud screech of an alarm and it crashed. Had to remove the battery to restore CMOS so it would post. I had set it before to 210 and that worked okay, so when I was showing off to a...

Rev 0, F3: This mobo shows a black screen during cold boot, for approx 20 seconds, and usually the first thing that appears is loading operating system, the first XP screen. I'd guess the video card (Asus 5770) is not loading quickly enough to have video before about 20 seconds, wish I knew...

This is on a dual board a GA-6BXDwin2K sp4. On starting up I get the audible warning and think, Ah yes one of the CPU fans has packed up. No, both are running fine but the BIOS are showing that number one CPU fan is not running. The no one CPU is actually a degree c lower! OK I then turn off...

Except it's not actually for sale anywhere. Looks good though. -Kent

http://www.pcstats.com/index1.html That place must have cost some money. It is amazing the how low the retail price of a motherboard is considering everything involved. Enjoy, Kent

I just managed to resolve this issue, seemed to be related to my mb (965P-DS4) so thought I would post it here hoping it may help someone else: PROBLEM: Conflict/Bug between (unused) Gigabyte SATA controller / IDE controller and Vista BACKGROUND: I had a problem where my DVD burner was not...

1 x AMD (Venice) Athlon 64Bit 3200+ Socket 939pin 512k L2cache 90nm Retail Boxed Processor 88109 £106.76 £106.76 1 x Kingston 1GB DDR PC3200 400MHz Non-ECC CL3 (3-3-3) 184pin DIMM's (Kit of 2 x 512mb) 49296 £59.14 £59.14 1 x Gigabyte GA-K8NSC-939 SKT939 NF3 250gb 8channel audio AGP8x Retail 91670...

Posted this problem some time ago in another group but it was never resolved, trying again here. PC appears to be coming out of Standby, there's HDD activity and the green On LED is lit but nothing appears on the screen. Normal Startup, Shutdown, Restart & Hibernate all working OK. Things I have...

I have a Gigabyte GA-K8NSC-939 m/b which has nForce3 chipset. Would like to upgrade video card from present Matrox G450eTV since I have bought a Sony Mini DV camcorder and don't now need the analogue capture. Question is if I have an nVidia chipset is it better to get an nVidia card or does it...

have a Labtec optical USB/PS2 mouse and a Gigabyte GA-K8NSC-939 m/b. If I use the mouse on the PS2 port it doesn't work and stops the PS2 keyboard working as well. No error messages, no problems showing in Device Manager, it simply doesn't work and there is no light on it. If I use it on USB port...

Just installed new Gigabyte GA-K8NSC-939 m/b. It has 3 fan connectors on it: CPU_FAN - connected NB_FAN (chipset) - connected SYS_FAN - ? Don't know what this is and m/b manual just says it should be connected. Does it mean a case fan? If so I have a case fan which connects to PSU via standard...

Hello, When installing a new Mobo, I've hooked up the DVD/RW to primary master. No other IDE devices. I do have a floppy installed. I plan on just installing WindowsXP on the SATA drive. Nothing else special planned with it. On the SATA Controller, is it better to select IDE or RAID ?