|
|
"help" Linux(slack) On ML370 Smart-2dh by
misfit
Im desperatly trying to get at least some sort of Linux distro on my compaq
ML-370 SMART-2DH Array Controller , Ive been working on this problem for a
week and have been through alot of the compaq how-to sites, fedora makes
it the closet {hangs on megaraid) but id really like to get slack 10...
|
November 17th 04 04:29 PM
by VinceV
|
1 |
500 |
|
|
'Wrong slot' message with a RIB in a Proliant 5500 by
jamesbird
What have I done wrong? I've a proliant 5500 that seems to be a happy
bunny, running SBS2k, twin CPU, plenty of RAM etc, and a Compaq RIB 56k
part 294040-001.
Becouse of the full length of the RIB, and with a 'handle' on the end,
there is only one PCI slot it'll go in, BUT the smart start utility...
|
|
1 |
486 |
|
|
144 vs 288 megabit Rambus Memory in W8000 by
CHANGE USERNAME TO westes
How significant is the effective performance difference between 144 Mb and
288 Mb RAMBUS memory in the Compaq W8000? Why don't they allow 288 Mb
memory in all four memory slot pairs?
--
Will
westes AT earthbroadcast.com
|
|
0 |
721 |
|
|
146.8 GB drive in a RA4100 by
Joe Wells
Hello, all.
Has any here tried to use 146.8GB drives in a RA4100? I know 72.8GB is
supported, but hp doesn't want to give a straight answer about 146GB.
Thanks,
Joe Wells
|
|
0 |
621 |
|
|
1600 help on last straw here by
Buzz
Hi Gang,
I been reading your form for the last few days looking for a
solution, (other than beating on this with a big hammer.)
System: Proliant 1600r 2 450 cpus, 512 menory, 2sl raid card, 5 compaq
scsi 10K drives in internal bay Running 2000 server. All was fine till
a few days ago the the...
|
January 31st 05 02:41 PM
by Buzz
|
0 |
304 |
|
|
1600 will not boot by
Adam Raff
Good Day,
We have an old 1600 that was working fine. It had a 3200 Raid Controller
with a raid 1 and 5 setup. OS mirrored with data Raid5. The system was
running Windows 2003 SP1
|
|
4 |
738 |
|
|
1600R Fastest CPU Supported (or working) by
Lauren Buchholz
Hi, I have a 1600R with a PIII/550 in it right now. I know according to the
specs it only supports a 600MHz CPU, but has anyone gotten it to post and
operate correctly with a faster CPU? I have a 866MHz from another Compaq
server in a static bag and I am trying to see if anyone has attempted...
|
|
1 |
463 |
|
|
1600R just won't boot from Smartstart by
Trojan Hussar
I've just acquired an old 1600R which had been working (all except for
a noisy cooling fan) but had been pulled and stripped for parts.
I've just dropped in two VRMs and a matched pair of Pentium II 400MHz
processors and a stick of 256Mb PC100 ECC RAM.
The machine boots up and acknowledges the...
|
April 29th 06 09:41 PM
by Jez T
|
4 |
460 |
|
|
1850R no powerup by
We are Borg
I have here a Proliant 1850R with all switches to default. Also there is one
CPU present in the system and 2 memory banks full, everything is installed
how its writen in the manual.
My problem is that when i connect the power supply the system wants to start
the amber light turns green but 1...
|
|
0 |
1,299 |
|
|
20 Pin ATX Tester by
Kevin Childers
Got a friend selling these pretty cheap, thought I'd pass it along.
20 Pin ATX Tester
CoolMax 20 pin ATX power supply tester. Quickly isolate and verify power supply failures. Checks all ATX output voltages, +3.3V, -12V, PG, +12V, +5VSB, -5V, and +5V via LED light. Also checks 4 pin peripheral...
|
|
0 |
4,621 |
|
|
20/40 DLT drive install in a ML530 Server by
Adam Raff
Good Day,
I hope someone out there can help me out here. I have a ML530 I believe
it's a G1 or original ML530 server (It is not a G2). The system came with a
20/40 DLT internal Tape drive which is connected to the internal SCSI
connecter. The DLT drive went south and I just got a new one by...
|
|
1 |
556 |
|
|
256Mb EDO DIMMs - Are they faster than lower capacity ones? by
Jason Arthurs
My ever expanding Proliant 3000 now has a gig of memory (still running
Memtest86 on it) and the transfer rate is about 7Mb/sec faster than
the motley selection of 32Mb DIMMs I had in it before.
Are the 256Mb DIMMs faster? I'm assuming that if I mix any of the old
RAM back in the transfer speed...
|
|
8 |
613 |
|
|
3 Phase supplies and Compaq cabinets by
Cubzilla
Hiya all
We are trying to install a 10K series Compaq/Hp cabinet to support an
EVA5000 the cab has 2 PDU's is it ok to feed the 2 PDU's from separate
phases or will this be a health & safety issue ie the potential difference
across the 2 phases could reach 480 volts.
any URL's to the info would...
|
|
5 |
1,640 |
|
|
301 Keyboard Error - 3 Different Keyboards (all get lights a'flashin') by
Kris
My neice has a Deskpro EN (500 Mhz, I think). It was working, had to
be moved and now I get a 301 error. I have tried 3 different
keyboards and they all flash when plugged in but that's all I get, no
keys work. Then, if I just let the PC sit for a few minutes,
NUM/CAPS/SCROLL will flash on and...
|
|
6 |
508 |
|
|
320GB of RAM by
Nut Cracker
yep .. thats how much memory the 100 ML530G3 servers I am working on for
this DR are stacked with.
these suckers boot slowly, but damn ... once they get rolling, they are FAST
!!!
- LC (DR in Philly)
|
|
6 |
845 |
|
|
4214R Drives Stopping and Starting by
Will
I have a Compaq 4214R rackmount drive case where the drives in slots 3 and 4
are stopping after about 15 minutes of use. The next time a Windows 2003
application needs a file on the file system that is mirrored on the drives
in those slots, you can hear the drives starting up, and after a long...
|
December 19th 04 05:35 AM
by Will
|
0 |
600 |
|
|
5300 SCSI Array detects only 7 drives by
David Wood
Anyone know how I can configure external SCSI Array - there are slots for 15
drives but the controller only detects 7.
Should this happen automatically or are there hardware switches?
The external array is Compaq Storageworks not sure of exact model
Advice appreciated.
|
|
5 |
329 |
|
|
5700T by
Sam
I recently came into posession of a Compaq 5700T, I need the Motherboard
Chipset Disc.....Anybody have an idea where I can download one? Tnx
|
December 11th 04 04:58 PM
by Sam
|
0 |
338 |
|
|
6400R questions by
alewis
Hi
New here, but looks like a good forum :-)
Just acquired a 6400R server, fitted with 2 x PIII Xeon 500 2mb CPUs.
What is the max CPU speed this server will take? I'm wondering if ROM
upgrade (or unspecified DIP settings) will allow better than the 5.5x100 -
specifically I'm looking for 7x100...
|
February 15th 05 03:42 AM
by MikeR
|
3 |
1,094 |
|
|
800 Motherboard in 2500 Tower by
Jeffrey Alsip
I have been considering the possibility of dropping the motherboard
from a Proliant 800 into an empty Proliant 2500 tower case. It looks
like everything will fit just fine. Does anybody see any potential
problems with this?
|
|
2 |
424 |