I have the following: GeForce4 MX 440 AGP 8X 64MB Asus P4P800 Mother board 512MB ram All components are brand new and after install the highest resolution it allows is 768 x 1024. Any ideas on what to do? Thanks...

Has anyone picked one up yet? Do you like it? Is it worth the extra money? Where'd you get it? TIA Rich --

Is it possible to replace the current dual-fan system with a Zalman ZM80C-HP and still get a temperature reading from the nvidia driver/msi utility or does the software depend on the RPM's from the fans? thanx i advance Lennart

I used to run NFS 5 on my P3-600 and my TNT1. It ran fine. Now I have just bought an Aopen geforce 4 440MX x8 graphics card and the game doesnt run as smoothly any longer. It runs smoothly most of the time but there are certain areas where the graphics start to grind. What can be the problem...

I just posted my problem about waviness when scrolling, and driver not showing up as installed properly, and then solved it two minutes later, by reading the NVIDIA FAQ. Another tip-off as to my problem; I was not able to display in maximum number of colors, which I should be able to do, given my...

Hello, I try to update my display driver under Windows XP, an I have some troubles... I try the nvidia drivers 45.xx, the leadtek 42.xx, and finaly I must re-install the cd drivers (very old version 29.xx) When I try recent drivers, When the install finish I have a message like "Drivers...

When I switc my GeForce4Ti 4800 in TwinView I can select in OpenGL properties driver page to allow acceleration on both head or only on primary. Im delevoping OpenGL application and I need to enable acceleration only on one head and on secondary head. Is there any way to cheat driver and setup...

Question 1. Can I have 2 CRT monitors with independant resolutions? 2. Can I have 1 RT and 1 LCD with independant resolutions? 3. Can I have 2 LCD monitors with independant resolutions? Running Win2000 Thanks

Well, so much for Nvidia in PS3, at least for now. http://www.gamesindustry.biz/content_page.php?section_name=pub&aid=2161 NVIDIA link with PS3 rubbished by senior source Rob Fahey 09:38 01/09/2003 "Lashing NVIDIA's technology onto the PS3 architecture would simply

I bought this vidcard and as soon as I installed it, I've ran into constant lock ups, infinite voice loop lock ups, stalling fps while in game, complete memory dumps and error messages from this thing and it's becoming more and more common. I've d/l'd new drivers, reinstalled the hardware with a...

Does anyone know of a site, where the different nVidia chips (GF2, GF3, GF4 Ti, FX, ect) are benchmarked against each other? I would like to see what FX card really outperforms my GF4 4200 128mb 8x MSI card. And if it is worth the price or not for DX9.

Hi, i have just connected my graphics card to my widescreen tv (with quite a bit of hassle why the hell do they make it so iffy?) i figured that if you have the tv in "smart" mode then it will detect if the signal is in widescreen or not and eliminate any black bars at the top or bottom. I was...

I've connected my computer to the television via the S video outlet and inlet so I could play dvd's on the television however I'm not getting anything on the TV. Do I have to activate some soft ware or something ? Any help would be appreciated. K.C.

I have a geforce 4 ti 4400. It is 4x agp card. I bought a new mobo with 8x agp.. Will my card run on the new mobo? Will it run at 4x or will the speed increase? Or worse do i need a new 8x agp card :( Thnx :)

Hey Gang, Sorry if this has been brought up 1000 times, but I'm having a little trouble getting my Nvidea TV-out working with my JVC (AV-36330, I think) TV set. The picture comes through nicely, except for an approximately two inch black border between the picture and edge of the screen. I'm...

Hi, How can I select DVI as input on nVidia MX440 Video card? I am trying to connect Planar LCD with DVI. Thanks Taj Haslani

450 Mhz Pentium III GeForce 2 MX 400 WinXP The crux of my problem is that I get the exclamation point in a yellow circle, in the driver display in the DEVICE MANAGER next to GeForce 2 MX/400. When I scroll, although text is readable, it waves, and I didn't have that before. I've tried...

Since installing the latest drivers from the nVidia site for my MX440 x8 V64 on my Windows ME system I get an error message when I try to shut down the computer. It says something similar to "nVidia dual display - this program is not responding" - then the computer hangs and always runs scandisk...

I've just upgraded to a PNY GF4 ti4200 8x card from a GF3 ti200 on Win XP. My problem is sometimes when I start up the PC either resets itself or leaves me with a blank screen and I have to reset it. This happens just before the welcome screen comes up. I've tried different driver versions (41.09,...

Hello I have just bought an Asylum FX5900 card. the card is AGP 8x able but my motherboard is not. But in the control panel and other sopftware such has NVHardpage, the settings shows both the card and the motherboar set at 8x AGP. Shouldn't it be down to 4x since the mobo doesn't support it...