All, After upgrading my bios I see the option for 2200 but all the info on searchs says 2100 is tops. Is anyone using the 2200 with this board? Thanks Geo

I have been told in another post that the NF7-S v2.0 won't work with Twinmos RAM unless the BIOS is updated. How much truth is there in this and also would this stop the board autopowering off when no cpu fan is detected? Thanks in advance.

Here is the Setup: Abit KD7-E MB 1/3/03 bios date Athlon XP 1800+ Retail CPU (266 ?) Mushkin DDR PC2700 256 MB Stick Maxtor ATA 66 IDE Drive - Primary IDE Master 40x IDE CDROM - Secondary Master liteon 12-10-32 CDRW - Secondary Slave Pny Geforce Ti200 64 MB BB Black Friday card SB Live 5.1 oem

I bought this cheap IC card reader... I burnt up the first one since Abit puts their header pins backward on this board. But I bought another (one 8 bucks) and hooked it up right. Well, it only finds compact flash cards, used with my canon camera, but wont find smart media cards (used with Nomad...

I don't like those messages you are getting from the IAA... almost sounds like a mismatch between versions of the raid driver and the IAA or something like that... -- Thomas Geery Network+ certified ftp://geerynet.d2g.com

Instead of having XP freaking ask each time to insert these RAID drivers via floppy... is there anyway I can have it included on a CD or some other device? I want to throw away my floppy drive.... too old.

I am going through a nightmare to try and get my USB1.1 Creative Nomad II MG to work on my Abit IC7. I can download files off of it, and change settings, but I am unable to upload files. I have spoken to Creative support, but they just have a list of questions as usual and couldn't help. I have...

I recently purchased a new Abit AT7-MAX motherboard. Worked great out of the box. Then strange things started happening. There are 2 LEDs on this board, green and yellow. The yellow one should be on when there is power to the board and both green and yellow are on when the system is...

Trying to update the bios for new 1Gig P3 CPU and the abit bios for SE6 will not flash, get an error that the MB is not of the right type or something to that effect I know there have been upgrades to this board, this is running with the default "WL" dated 11-30-200 Thanks John

Does the number of allocation units (at 512-bytes/sector) a Maxtor 6 L040J2 38172MB (40-billion byte, ATA-133 running 1.25.0.10 Hpt366 drivers on XP Pro SP-1 with NTFS volumes) hard drive transfers per cycle vary inversely with allocation unit size or is it constant? Does CPU utilization vary...

Hi, Just stuck a new system together for my girlfriend and it doesn't work :( All the system fans spin up including the graphics card's and the hard disk spins up. There is no video output, the optical mouse doesn't light up when plugged in to either the PS2 or USB ports. The keyboard lights...

In article , stacko23 @my-deja.com says... Hi NG! I'm having a big problem: One of the 2200 µF chemical capacitors near the cpu socket of my abit KT7 has exploded yesterday. It just separated in two parts, with a loud 'pop' sound. I was...

From what i've been able to piece together from all the posts for mating the KT7's & XP 2400 and above, is you need to do a board modification to enable the multipliers to get the 133fsb to work. You can either do the wiring yourself, or try using this...

Hi! First of all, I'm sorry for my poor English. I bought a Barton 2500+, already tested for 11*200. I tried it on my kg7-raid at 12,5*150 (150 is the FSB I used with my old T-bird, rock solid), and things went fine. Then I tried to cut L3 3 and 5, in order to get higher multipliers....

I have read a suggestion that running two 333mhz RAM chips in DUAL DDR mode can be as fast as 400mhz RAM as the chips are accessed at the same time hence maxing out at the 400mhz FSB. This would save me money should it be true as I already have a 512mb DDR333 chip and this would mean I would...

Just upgraded to a XP2500 Barton 333fsb but not enough cash to upgrade the memory too (512mg PC2700 costs more than the cpu!) Anyone know the optimal settings on my ABIT KD7-RAID for this combination? So far I have the FSB at 133 and the multiplier to x14 (133x14 = 1862mzh), no other BIOS changes...

I have a SE6 V1 MB that has been running a 933 P3 ok, but not able to use a 1G P3, from the number on the Intel site the and the Abit latest bios this should not be a problem.. what am I missing. I tried this on a SE6 V2.1 MB too... with the same results... just dead on power up... Thanks.. Matt

Hi there! I managed to get my KT7A and a Palomino 2000+ to run fine, no problems so far :) Okay, except for this one: Sometimes, when I restart my OS, the board hangs in POST. After pressing the reset-button the system will boot fine. I know that my CPU isn't officially supported by ABIT so I can...

I'm having weird lockups which I think may be as a result of using this... Any ideas? Thanks in advance...

Yuma, Please email it to - make sure you remove the NOSPAM portion of the address. Thanks, Jakov