How can i overclock my P4 with the bios. I can only increase the vcore to 1.6V and this does not increase my clock speed, nor does ti alter the voltage. Any idea's? Thanks, -- phrag http://gan.gs/box Linux-2.4.24 Slackware-9.1-current

Looking to use my Athlon XP2000+ and Zalman CNPS 6000 Al-Cu flower cooler on one of these boards. I notice the CPU socket is turned 90 degrees so the flower cooler will mount left-to-right rather than top-to-bottom as on my current MSI K7T Turbo2. Does this cooler fit ok, ie: doesn't hit any...

Does Anyone know how to install a sata hd on this mobo as it doesnt come with a floppy with sata drivers on it. trying to make it a main drive and I Think the drivers are on the Cd that came with the Mobo, But which ones? I dont want Raid config Any help would be much apreciated Rotor:-

Hi All Ga 7n400 pro2 with XP3200+ (400fsb) 2* 256 PC3200 (DDR 400) Kingmax Ram Gigabyte FX5600XT IBM 40GB (C: pri ma) Pioneer DVD Rom (pri sl) LG 4081B DVD multi write (sec ma) Samsung spinpoint 160 GB (sec sl) TDK CD writer - on Gigagraid ATA

i own a 8pe667ultra matherboard.i updated the bios with the bin file of 8pe667pro. now i cannot update tha mobo with th correct file.it gives me the message that the sizeof the bin file is not correct. how can i update my mobo with the correct bios ?is it reversable?or must i search for a new mobo?

Has now been running for over a week without a single hitch. http://www.octex.com/3g5-wcpuid.bmp Intel HSF, standard voltages but the case has an 8cm side fan blowing air straight onto the HSF. http://www.octex.com/3g5-temps.bmp Not bad for old 533MHz GA-8IEXP mobo and Micron DDR333. With DDR400...

I get around 4700 MB/s from the SiSoft sandra memory bandwidth benchmark. This seems a little slow from what I have read on the web. I have the following settings and I list these as they are the settings that I have read effect this benchmark result. Bus Speed 800MHz Dual Channel 1GB Corsair...

Ok, so I got my 3D Cooler-Pro, installed it no (major) problems. Now for a few thoughts: 1) Its expensve 2) It works like a wonder about 7C cooler than my "dremmeled" Volcano 11 (almost as good as my PAL Alpha 8045, but that dont fit on the GA7-NNXP)! 3) Unless Gigabyte re-write the install...

I am looking to overlock my P4 2.6GHz. I have raised the Multiplier value from 200 to 212, which auto sets DDR424... which gives me: model name Intel(R) Pentium(R) 4 CPU 2.60GHz @ 2736.247MHz I have only tried few variations after this. Anything higher and my system either does not boot, or is...

After having a drive of a RAID 0 go bad on me and giving SMART errors (as seen during boot with the intel RAID), and after rebuilding the system several times over a few months (yes, I had backups :-)), I received a replacement drive. I then decided to install the two SATA drives without a RAID...

Hello folks, I have read what my news server has, as far as messages in this group, that pertain to the promise raid controller. I have a machine that had 2 IDE Master drives on the Pri and Sec IDE controllers. I am trying to move them to the raid channels. Once there, I will format them, and...

Does anyone have a feel for when the rev 2 version of this motherboard will appear at NewEgg or Mwave? I don't mind waiting a few weeks but if it's more than a month I will settle for the original GA-8IK1100. Besides IDE raid and using a Realtek 658 is there any other difference between the...

Have a old Gigabyte board here that is version 1.1 of the BX2000 (not the plus version). Reading the installation guides, it says that you can set the dip switches up to 133 MHz and 9.5x multiplier and that equates to a 1.26 GHz Slot 1 Pentium. However, they say it will only take up to a 650 MHz...

Ok MB 6vxe7+ I flashed the bios hoping to get more setting about enabling cache when I rebooted it beeps at me and won't boot. Looking at the web page I think I used the wrong flash. D/led the correct bios I am running XP I made a 98 boot disk put in the correct flash using the dos...

HI, just tried out the new Bios F8 for Ga7-N400 L1 and encounterd the problem that my CPU temperatures rise from 52 C to 90 C. Flashing it back to the old F7, everything is back to normal. The new bios brings along the ratio support for 12.5x and is good for overclocking moderatly when using a...

Is the manual correct in stating this board only does SATA RAID 0 and only on WinXP? TIA, Eric

Hi, I got a problem with a friend's GA-7ZXE v1.1. The motherboard makes a rattling noise through the speaker, and won't boot. CPU fan and str-led come on; drives don't seem to get initialized; hdd led stays on. Obvious things like removing everything except CPU, RAM, and video or pulling out...

just plain suck ? I am trying to get a 7VRXP with the chronically problematic MBFastTrack133 lite piece of crap running. Not for love, money, or world peace will the XP take ANY drivers that will recognise the controller while installing. I am trying to get it to install to an 80G mirror, but it...

Hello, I am looking at getting a new motherboard for a P4 2.4C CPU I have. The boards I am looking at (because of the good prices I can get them) are the Gigabyte GA-8IG1000PRO (865G chipset) and the Gigabyte GA-8I875 (875P chipset). Which board would be the faster board??? Is there...

how do I find out what needs upgrading, I went to the gigabyte site, and chose the MOBO to update, hit search, nothing. I am having a problem with my machine, I have p4 2.5, 1024 DDR RAM, 2 hard drives, one is SATA for data, with XP, and I use my machine to make music. When I run some music...