Try reflashing that BIOS, esp. if it's not current. Jim "Tom Sheen" wrote in message ... I have an Abit NF7-S. With an NVidia Video Card, 756MB of memory and running XP Pro.

How do I enable powernow on the nf7-s?

Greetings, I recently set up a new system with a KV8-MAX3 mobo, 2x 36.7GB mirrored raptors (C:) on the VIA SATA controller and 2x 120GB mirrored Samsung SpinPoints (D:) on the SiL SATA controller. The mobo is running BIO 2.0. I then drove the system over to Switzerland and over the course of the...

I have an Abit NF7 with an Athlon XP 2200+, 256 PC2100 Ram and a 350 Antec PS. It runs great with a ATI Radeon 7500 4x AGP video card. When I drop in a Nvidia Gforce4 MX440 128MB 8x AGP video card and turn on the power, the lights and fans come on, but no POST, no beeps, no video. I have tried...

Hello Group: I am using an IC7-G mobo in a WinMCE system. I'd like to be able to turn on the PC with the remote like the store-bought machines can, but the USB- connected IR receivers don't work to start the PC. What kind of IR receiving device can I buy to connect to the IR connector on the...

abit av8 - is there a way to use software or a utility to control my case fan, cpu fan speeds?

Looking for members and moderators to help kick-start a new tech forum: http://www.techtodayonline.com From the same folks who in three months catapulted http://www.photocamel.com into one of the top photography discussion sites.

W98SE, latest BIOS revision... I've tried 2 different 4X AGP cards and I keep getting the message... "This driver does not support your video card" And the install aborts. Best I can get with W98SE is VGA - 640x480 w/16 colors

Hi guys, i have a GREAT problem. I own a ABIT SE6 motherboard with Celeron 600MHz processor. Two weeks ago, it started to give me this problem: when i start the operating system, either Windows or Linux, it reebots... I removed all the PCI card, I changed the hd and the memory slots but it keeps...

Let me begin by explaining to you my request. In September of 2003 I was diagnosed as having testicular cancer. Having no insurance I decided I would just do what i could to save myself. Long story short, I am at this time cancer free, but $30,000 in debt. I do not know where else to turn except to...

And should i stick with pc3200 ram or go better ? A 200 FSB is all i realy want but what can i do with a Barton 3200 ?

Hi, Bought an AN7, a boxed 2500+ Barton and CMX256A-3200C2PT (2 modules in one pack, TwinX). My goal was to overclock the barton to 3200+ simply by putting FSB to 200Mhz, i've been told that this works flawless. Anyway, when i first ran my new system and get straight to the setup window to set FSB...

OK I am tearing my hair out on this one. Fairly inexperienced at least compared to most folks in these forums. Just built a new system with KV7 AMD 2500 Barton ATI AIW 9600 512 Corsair XMS3200 Western Digital 160GB SATA (first time user) 4 partitions NTSF LITEON 411 DVDRW

PCWorld is offering the KV7 at GBP47.59. Is this board worth having - should I get one? I liked my BF6 but the caps blew up (I have replaced them and it works fine but is out of date).

Hi there! I wonder if any one has any ideas on a problem that is kicking my butt! I have a Abit KX7-333 mobo with a Athlon/xp 2400 retail chip on it.... It also has a single stick of 512mb ddr333/pc2700... This board operated for over a year in one of my machines..... Since cannibalized for...

Just finished installing an Abit IS-10. Switch on the power, no beeps, error message from monitor to check conection to pc. Cpu fan fires up fine. What do I do now, send it back to Newegg.com? -- www.newromesucks.com www.hamsterforpresident.com

Just finished installing an Abit IS-10 (mATX intel I865G). Switch on the power, no beeps, error message from monitor to check conection to pc. Cpu fan fires up fine. System also has : 350 watt supply, 2 245mb Buffalo ddr 400 ram Celeron 2.4 ghz, 400 fsb Connected a hd, it's getting...

**** Post for FREE via your newsreader at post.usenet.com **** BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= *** Usenet.com - The #1 Usenet Newsgroup Service on...

Greetings, I'm trying to wire up my new home-built PC: - Antec P160 tower case - Antec TruePower 550W PSU - Abit KV8-MAX3 mainboard - AMD Athlon64 3200+ CPU/heatsink/fan - 2x Corsair XMS3200LL Pro 512MB RAM - Sapphire Radeon 9800Pro graphics card

I have been told that the KV7-V won't work with more than one DIMM at 400MHz. Is this true or just utter nonsense? Thanks for your time.