Hi, I have a Gigabyte GA-6BXD motherboard, revision 1.6 and was wondering whether it supports Coppermine CPUs. Gigabyte seem to have removed the CPU support information from their website for this board... Cheers, Campbell

Hi, I have a GA-7N400 Pro2 with the ide raid controller operating non-raid and I boot from it. I have other drives on the non-raid controllers that also work fine. I do not use SATA. I'd like to now add another drive to the ide raid controller, mirror the two drives and boot from them. Can this...

Hi there, I have a problem to update the AMI-BIOS GA-7IXE4.F7 to GA-7IXE4.F9 or GA-7IXE4.F8. It doesn't matter if I using the tool @BIOS or the original FLASH-Program. After approximately 12% the update stops and then there will happend nothing, without any error-messages. The AMIBIOS-Setup...

this mobo wont detect any pci slots , anyone else have these problems p4 3.0 1 gig kingston Turtle beach s c ( wont work ) xp pro

Hi all, My saga continues. I'm installing a GA-7N400 Pro2 fixed my CPU recognition problem but was having problems getting my two WD drives to boot into XP as master/slave on the RAID channels as normal ATA. Anyway, I set BIOS to RAID and on the Gigabyte I set the RAID to "normal". It state an...

Interesting thing on this motherboard. When I boot the system, the chipset fan runs. Windows XP boots to the login screen. Fan still running OK. Fan will run for hours sitting on the login screen. When I log in, within 2-5minutes the fan stops. Voltage running is 11.80 volts dc. when it...

Hello All, I just kicked my FSB up to 185 (x11.5) to get 2167Hmz... EZT4 is telling me that the CPU tempt i sabout 72C under full load. Is it just me or is this a bit high? Dram = 370Mhz/2.6v AGP= 74Mhz/1.6v PCI = 37Mhz CPU = 1.932v

this is a general post for those who are having trouble with winxp not seeing their soundcard or whatever in a PCI slot. i don't know if it will work for you or not, but i'm posting this here, as google holds onto everything. and for me and other's that need this info to try saving them hours or...

has anyone used the f9 bios yet? i've installed the f8 bios crippling my machine because it was meant for the ultra version, and not the non ultra version - in which i complained and though they never replied they did come out with this new version. so before i mess up my machine again, has...

Hello, This may be useful or informative to those of you who install Heat Sinks and Fans on your processor on the motherboard. I am building a new AMD-based computer... XP2600+ 333 on a GA7N400 Pro2 MB. When putting on the new heatsink, I decided to take a few hours trying different heat sinks &...

MY motherboard Gigabyte 7zMMH v2.1 with latest f11b BIOS with 768MB PC133 Crucial RAM Thanks for reading. Just upgrading my Duron 800 to an Athlon XP2400 266FSB. Changed the jumper on the mobo to 133Mhz and the machine will not even POST with this chip installed, no beep, no video or anything,...

This is who I contacted and got OK support answers back within a couple of days Note the domain is giga-byte.com this is for the US From: Sent: Thursday, March 06, 2003 5:25 PM Subject: RMA Request

Hi, Just built a PC using a GA-7N400 Pro2 with an Athlon XP2800+ and a Radeon 9600XT. I decided to buy a Maxtor 6Y080MO Plus 9, 80 Gb SATA HDD, and just can't get Windows XP to recognize that the drive exists during the XP installation process. This is what I have done so far. Can anyone tell me...

Hi, I have a GA 8knxp (Rev 1) running under windows XP. I am using the onboard G-Bit LAN which is supposed to support 1000/100/10. However, the connection is only 10 - the hub I am using (Linksys Ehterfast 10/100 5 port hub) only shows it as being a 10 connection - is this a Hub problem? Is it...

I'm contemplating this motherboard for audio editing. I want a: 1. STABLE 2. Fast platform. I like the CPU bandwidth (6.3 GBytes/sec)

Finished a Cooler Master Wave case with 8knxp board and all the trimmings. I searched the news groups but would like to know more on how to tweak the machine now. 1. Recommendation about bench march program? 2. MBM5 indicates 25C for case and 67 during DivX encoding normally 45C. What are normal...

Hi, Just got my 8KNXP, will be fitting it at the weekend. Any advice on installation, setting up or Bios tips. thanks al

Iv'e been running a single 80GB WD drive with win2k. I now have another identical drive and want to run a stripe array, the new drive is clean but i dont want to destroy the data on my origanal drive. I have been through the books to no avail, anyone got any Ideas ? TIA Jim

Hi all, I just brought a GA-6BXC off eBay and it's turned up DOA (at my end, worked for seller) and i'm just wondering if anyone out there can help. The symptoms a -No POST -No beeps -When IDE is plugged in, HDD does not spin up -Will not turn off (except for pulling power plug)

I just bought this MB and I have XP Pro intalled using two IDE hard drives in a RAID 1 format. When I try to install the nVidia System Driver off the installation CD that came with the MB, I get a hard error in XP and I have to use System Restore to uninstall it. I tried using the System Drivers...