I seem to have memory incompatible with this motherboard, I didn't look at the list of approved memory and just went for the newest fastest most expensive they had thinking at the worst it would scale itself back and be OK. Very Wrong. Got 2 X 512Mb Kingston KHX 3500 Hyper X and it will not run at...

hello from france in your opinion: via kt 400 or nforce2-st ? regards olpa --

Hi, I have a P4PE with a Celeron 2.0 overclocked to 2.67. I have a 350 watt Aopen power supply and 512 mb of Crucial PC2700. The core voltage should be 1.525 but according to Asus Probe it fluctuates between 1.5 and 1.68. This seems like way too much fluctuation. I have the core voltage set to...

In article , Brent Pendrak wrote: Although I have built one system previous to this one, I was not the one that hooked up the Case LED's and I am having some problems. I am using a Chieftec/Antec case (You know, one of...

Asus Tool Probe 2 is messuring cpu and mobo temperature. Sensor is on-die in cpu. 1) Where is the sensor for mobo located? (on die in memory hub 865)? 2) What are the recommended max temperatures for CPU and for mobo? (After 90 minutes with 100% cpu load temperature arises a steady state of 55...

i couldnt find an asus newsgroup other than mainboards so i thought someone here might know recently (a couple of months ago) i bought a TI 8440 ultra delux video card. (tv in tv out, dvi out, stereoscopic, etc.) well the stereoscopic function worked great in 98 BUT now i am running XP Pro i...

"Poot Dog" wrote in message ... The clock on my computer is running fast on my box. I'm running WinXP Pro and know how to update the time manually but it's a pain in the ass. I've seen posts regarding this in the...

I'm experience a wired problem with the NVIDIA Lan onboard the A7N8X 2.0 In the bios the adapter is enable and WinXP finds the device fine.But on the task bar it shows a network cable is unplugged. When I physically plug the network cable in the NVIDIA port and hear the click there is no green...

On Wed, 25 Jun 2003 12:54:41 +0000, harry wong wrote: I'm about to switch back to an intel CPU (last one was a Pentium 90) on a P4P800 board. Just want to get opinions on noise. On another thread someone said that the stock Intel fan was noisy. I've been using a Coolermaster HSC-V62 for...

I've got an Orchid card that Asus doesn't recognize. Has anyone had any luck getting a 3Dfx video card to work? I've flashed the Bios, but no help.

Hi, Recently purchased this motherboard (P4P800, not deluxe), it has a builtin sound card and coaxial spdif output. I wonder if it worths to spend extra $ to buy the asus s/pdif output module (http://www.asus.com.tw/mb/mb_accessories.htm). All I want to do is to output mp3 to my MD, which has an...

Is anyone using PC 3700 Corsair or other? How compatible is it? Thanks. -- ..

Adriano wrote: Hi friends, some friends of mine told I have to add to my Asus P4C800 and Pentium IV a lot of memory (RAM). I have tought to add two modules of 512 RAM = 1024 RAM. Are they sufficient? Yes. And it is recommended to take into consideration the Asus P4C800 DDR400 Memory...

Is there any benefit of using PC 3500 other than overclocking? I am using two sticks of Corsair TwinX 512 meg now but have two sticks of Corsair XMS PC 3500 512 meg too. The PC 3500 has black heat spreaders and I don't know if that means the ram is different than the platinum model. Also, the...

see: http://groups.google.com.au/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&frame=right&th=1045666bc60767f3&seekm=3e08a180%241_11%40news.newsgroups.com#link7 I did a search on Google and found that someone had "recovered" their A7V333 USB 2.0's ports function by going into the device manager and...

Ron, I had it working for, my PC that is, 6 hours non-stop last night and the ZM-50HP eventually got warm to touch on the front. I think, to be frank, that my Geforce 4460MX card does not generate that much heat. Zalman themselves describe it as a low-heat card. (I personally think anyone who has...

Should I leave the memory timing to auto, 100%, or SPD? Or does it even make a difference? Thanks. -- ..

"tp" wrote: I'm looking for the *cheapest* and still *best* board to Overclock a Tbred 1700+, with onboard RAID0 preferably. Any suggestion? The A7N8X deluxe is a great board for overclocking. -- ..

Can one use both a Soundblaster Live Platinum 5.1 and the onboard SoundMAX sound card at the same time on the P4P800 Deluxe?. The reason i need this is i truely need the extra inputs and outputs for one messed up setup i have where i have multiple vcr's and audio recording decks hooked up to the...

In article , "Cliff" wrote: Hi, Looking at upgrading from a PIII 650, and I'm wondering about compatibility issues with my existing 300W power supply. The P4PE comes with an EZPlug, which I understand will let me...