Are there many other folks out there with this uATX LGA775 board? I must admit that I've bought it by mistake - I incorrectly assumed that all modern boards with SATA would support RAID, but this doesn't. Oh well, I'm stuck with it for the moment. It seems to function well enough, with a Pentium D...

I want to install this combination. Does anybody know if there is interference of the xp-120 heatsink/fan with te heatsink on the back of the GV-NX66T128VP ? Thanks.

I was going to a new hard disk and was using Partition Magic 8.0 to copy the win xp partition to a new disk. This is what I did: copied the win xp partition from old disk to the new disk. put the copied partition as the first partition on the disk. make this partition the "active" partition. make...

I had a small incident where my place flooded in and water reached the lower section of 2 of my motherboards when fixed on tower casings, the PCs were both turned off when this happened and I quickly moved them to higher ground. I have since then evaporated the water using a hair dryer and a high...

Hi guys, Just built a new system: GA-K8NF-9 3200+ Athlon 64 Maxtor 160GB HD (SATA) I've built a couple of systems, but ive never really had any hastle. This time.....its been horrible. Ive put everything together correctly

The original 40 mm NB fan went out 16 months ago, put in a replacement one, now it is very noisy. Is there an alternative to the fan, a larger heat sink or something? Robert Butler

Hi, I am having all sorts of problems trying to get my mainboards onboard LAN to work!! yep i can see the Local Area Connection icon in the network connections area, so this indicates the drivers are install and working fine as per device manager. but do you think i can get any traffic to go...

Hello, I have a GA-8ipe775-G and am genuinly content. On the Main board is 8 - channel Realtec soundchip. Surround is ok. Who has a plan, like I another Instumentdefinition for MIDI loads. For example SF2 files. (Software??) In addition the Joystik does not function - to first shot, this...

Hi, K8NS Ultra-939 - Why no +5v readout? The BIOS only shows 3.3. and 12v and combined. My 5v rail is also all over the place (e.g. 2.17 up to 5.4) using mbm5 and Speedfan, yet the computer is stable and my 5v rail is good using a multimeter. I thought it was a bad board so I RMA it and its the...

I have a self built system containing a GA7VAXP motherboard. I have a number of USB peripherals which have all been working fine (Zip drive, digital camera, pda, printer, and joystick). However, recently I discovered that USB sticks refuse to work on it. The first one I tried showed up as a...

Just to have some advise how to set MBM5 for GA8IP775. I cannot get correct readings. Thanks in advance for those who can help. BigVoice

Installed new Antec power supply to this board. Boots etc BUT sounds an alarm the whole time it's on. Antec manual says mobo "may not detect fans running less than 950 rpm and will sound alarm." How do I turn off alarm? Bios chip set features show "Fan Fail Alarm" have it set to "NO" but alarm...

"Odie Ferrous" wrote in message ... Tom Lake wrote: (I am also interested to hear about any other motherboards being able to use 4 GB/4 memory sticks in practice ! ;)) I have an MSI GNB Max with P4...

Anyone has BIOS tweaking guide for this?

Hi, I've search a lot about this argument but nothig was useful for my problem. I've a K8NF-9, and a couple of month ago I've update its bios to F4. Today I want to update to F9 but I cannot do it. Q-Flash said me that flash is unknown and after try to update a message about flash write protection...

Just completed my first Athlon 64 /Gigabyte computer for a local person. Very nice; faster than mine. However there is a problem getting a modem to work, which, of course I did not connect to an ISP before I let him have the machine as I did not know his password, etc. It gets to the point...

Hello all, My PC has been running quite happily on the F9 BIOS then I stupidly tried to change a setting (enable 1T timing) in the BIOS screen. I hit F10 and the PC wouldn't boot (series of long bleeps). I switched off the PC and restarted with the delete key. Anyhow the PC started (one long beep...

In the settings for the Intel D830 Dual Core settings. 1. CPU Hyterthreading - set to enable or disabled 2. Limit CPUID Max to 3 3. No Execute Memory Protect Thanks

It just keeps on restarting and going back to setup the entire OS all over again in spite of having it successfully installed on a fresh PC with all new components .... it just keep on installing.. when I remove the Win2k or XP CD, it says as Invalid Boot Drive, Drive System error, etc.....

I have found that some people have had success using third party programs, mainly ClockGen, to overclock their GA-K8N Pro SLI. In ClockGen, for me, I went into the BIOS first and set the CPU down to x6 and the memory down to 100 speed. Boot into Windows and run Clockgen and it freezes if I try to...