Hi Peop's Ref @BIOS for GA-81PE1000 Pro2 I just run @BIOS and it comlained that it thought it was out of date and that i should get the newer version from "The Website" but it failed to tell me where exactly, could someone point me in the right direction please? --

Hi My brand new motherboard doesn't boot. the configuration is ATHLON 64 3000+ , 512MB PC3200 KINGSTON KVR400, HD MAXTOR 120GB 7200. The system power on, I measure the power supply voltage ok, no beep message cpu fan running, but the display remain blank Do you have any suggestion Thanks Kinse

Hi, I had to replace my GA-7N400-L1, useless after a bios update, with a GA-700N-L yesterday. I have an AMD 2600 CPU with supplied fan and heat sink on the machine. I was browsing through the posts here for any info on this later m/board and read about CPU temps.. I checked the temps on this...

Does anyone know if the new Gigabyte GA-K8NXP-9 nForce4 Ultra motherboard can have a Thermalright XP-120 installed?, and installed WITH the DPS daugthercard installed also? http://www.hardcoreware.net/reviews/review-250-4.htm You see the DPS card just above the CPU retention socket, how does...

does anyone know if the 8knxp ultra64 w/ bios version f6 supports ddr2? thanks.

GA 7VT600 1394 Can someone tell me if this is the correct sensor for the case temp-sis950/ITE8705F 1? I believe this is the one for the CPU but not sure about the other, sis950/ITE8705F 3diode. There is another sensor, sis950/ITE8705F 2, which reports 28C. This is more in line with what a...

I've just built a system from spare parts: - Gigabyte GA-8IDML http://tinyurl.com/4se3t - Intel Pentium IV 1.5GHz 400FSB - 2x Kingston 256MB PC133 KVR133X64C3/256 - Gainward GeForce4 Ti4400 128MB - Western Digital Caviar SE 80GB 8MB ATA100 WD800JB - - - FSP 350W PSU

How exactly do you remove the black CPU surround/mount & backplate on Gigabyte s754 boards in order to fit Zalman CPU heatsinks? Is there a technique?

I have a Gigabyte GA-8IPE1000 Pro motherboard with the F11 BIOS. Prior to now, there have been no problems in the 14 or so months that I've owned this motherboard. I can't say if it's the source of my problem, but maybe it is. I have my mouse, keyboard and two game controllers hooked up into a...

Hi ;) I would like to know if someone managed to install this main bord (under bios v.FJ) with this scsi extension card. ==================== PROBLEM : ==================== the scsi bios message is not shown at the boot CTRL-A is not working

Thoughts/opinions -- After updating the primary BIOS and confirming everything works, should I update both BIOSes, or leave the backup. -- Ah, the miracle mile, where value wears a neon sombrero and there's not a single church or library to offend the eye.

Has anyone out there had any problems with loading the usb drivers for this board? Can't seem to get the damn thing to work!!! J T

hi all just got a machine in that only works with usb k/board at first i thought that there would be a setting in bios to enable ps2 or an auto keyboard setting.... looked for a keyboard setup and none could be found.....gigabyte 7s748 with an athlon 2600 / winxp i have setup a lot of 7s748's and...

I just bought 2 200 GB Sata maxtor drives that I wanted to install on the si Sata raid controller. I installed the drives and enabled the conrtoller and during post it tells me "no devices connected" when I try to enter the raid manager. I switched it to Base to see if it could see the drives then...

I have just set up a K8NSNXP-939 with 2 512mb corsair ddr400 memory sticks. If I put the memory in slots 1 & 2 or slots 3 & 4, the PC wont boot, just gives regular long beeps during the post. If I put the memory in slots q nd 3, it boots up fine, but says memory not optimised because its not...

http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True Yet another update for the realtek ALC 850 codec, the HD Audio codec drivers have also been updated for all you Intel 925X/XE...

Hi "William Bell" Only needed it to run a P4 2.4C and only for Music stuff like SONAR/ REASON etc, no games Its not for me, but this chap just needs a cheap card, he has a 3D and a Creative Audigy..

As I use my computer under high stress, the processor temperature rise rapidly – yet, the CPU fan does not increase in RPM as the temps rise I am running a P4 3E – idle temp is around 40c however, with 5 minute of playing a game (or something requiring substantial processing power I am looking at...

Hi there, I have a gigabyte 8ipe1000 Pro2 and a P4 3.06 hyperthreading chip. I was wondering if there is any way that I can cut the nonstop whirrin of the fans inside my PC. I have 2 case fans and a CPU fan. The cas fans are powered off the PWR_FAN and SYS_FAN connections. Speeds are as follows...

I have the above menioned board, and have run into a very annoying problem. I have two HD's connected to the primary controller, and started with one optical drive (a CD-R) connected to the secondary controller. I wanted to add a DVD-ROM as a slave, but cannot get my system to reliable recognize...