I finally bought a WD 120gig sata drive just for extra storage. When I first installed it, WinXP didn't see the drive until I put in sata raid drivers. I didn't know my mobo had raid? Anyway, after I put in the raid drivers the sata drive worked fine. I partioned and formatted it in windows. But...

http://www.giga-byte.com/Download/Download.asp?DownloadPath=/MotherBoard/FileList/BIOS/bios_8knxp_13a.exe For revision 1.0 motherboards. F13(Beta) 2004/11/1 1.. Modify the BIOS version F11 or F12 cannot install Windows XP when uses S-ATA RAID 0 or 1 mode

Hi All, I have a GA-7N400 Pro2 (Rev2) with an Athlon 3200+ and MBM5 shows a VCore Voltage of 1.88V, Sandra Sisoft 2004 shows 1.92V. Has anyone this Motherboard with an 3200+ and what are your Vcore Voltages? I think they are to high I am not overclocking and the Bios settings for the Voltages are...

While running 3 machines on the 7DXR motherbaords, i s it possible that 2 newer revision motherboards are worth an upgrade? - Me

Hi all I have built a machine with the above motherboard Amd 64 3000 2 * 160 Gb drives EIDE ATI Radeon Graphics card Pioneer CD/DVD burner The 64 bit edition of Windows installed on this system like a dream but the problems is using the supplied motherboard disc. It doesn't auto load like I

I'm setting up a new computer with windows 2000 on a GA-7N400 Pro2. All I've installed is the OS and the drivers. I'm trying to network it to my router (which is working properly with my other machine). As far as I can see the configuration is correct. TCP/IP settings show DHCP and obtain DNS...

I have just assembled a new computer with a Gigabyte GA-7VM400 AMF motherboard, Maxtor SATA hard drive connected to SATA0 and a Sony DVD writer connected as master on the IDE primary channel. After switch-on it went through the usual procedure to the 'insert system disk' prompt. I inserted Windows...

quick question...i prefer to stay current on all my driver revisions. how do i tell the driver revs for the LAN and ITE Raid Driver?? here's what i see: Realtek driver in System Properties is: 5.611.1231.2003 Realtek Driver on the Giga-byte website is: 6.15 Should I read the System Propp driver...

Hi, I am trying to install Windows XP to a RAID config. with two Hitachi 250GB drives on a Gigabyt GA K8NS mobo.(Using the onboard RAID controller) As soon as the windows installation asks for the RAID drivers from floppy, I get a message saying: textsetup.oem has encountered a problem (1024) in...

I have the GA-K8NSNXP-939 board with an AMD 64 3500+ CPU and on boot it displays the message 'Memory Not Optimised', CPU clock 200MHz. I'm using 2 * 512 Corsair XMS Pro (the ones with the LED's) and am not sure if i should set the memory timings manually (and I've no idea what the settings are...

Would appreciate any insight into the correct mb dip switch settings for my GA-7VAX to recognize a AMD XP 2600/333 Barton CPU. . . tia. . . cil

Hi all, just one simple question: where can i find a detailed changelog for the bios versions of gigabyte motherboards? Or, in particular, for my mb: 7N400 Pro2 rev2. Thanks in advance, regards! V

GIGABYTE TECHNOLOGY receives highest honors—15th Annual National Quality Award Following a rigorous appraisal process, the Taiwan Ministry of Economic Affairs presented the highest enterprise quality award to GIGABYTE TECHNOLOGY at the 15th annual National Quality Award Ceremony, held on October...

GIGABYTE 8Σ Series GIGABYTE to Launch Native 1066MHz FSB Motherboard – GA-8AENXP-D Nov 02nd, 2004 ---Taipei, Taiwan---- GIGABYTE Technology has once again redefined the definition of the enthusiast motherboard with the debut the first 1066MHz FSB motherboard to the technology...

Hi, i am searching for a board for a good IDE Raid. Did anyone has a raid-1 stable on a GA-8PENXP? TIA

Hi! I'm using a Duron 850MHz in a GA-7ZX with VIA KT133 chipset. On normal days BIOS reports 35 degrees celcius while software like MBM (based on via686a) reports around 43 degrees. I'd like to upgrade to a 1.3GHz Duron but don't know if the temp will keep under the 90 degrees celsius die...

http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True For Gigabyte GA-8KNXP rev. 1 + 2 motherboards.

Hello people.. My anomaly is with my gigabyte GAK8NS Pro. The board is brand new with firmware version F5 but not matter what I do I cannot find out why the hard drive led is on even when there is not disk activity at all. To totally irradicate possible hard drive activity I disconnected the...

I've seen two different versions of this board. One has a fan on the Nvidia chip and the other has a larger heat sink w/o a fan. Is there any other diffence between the two boards? Which is better? Is this and indication of a ver 1 or ver 2 motherboard? Thanks.

Mobo has a pin header for front or rear audio. To enable front audio two jumpers have to be removed and a cable connected. If I connect front audio, will this disable the rear audio, or will both front and rear work. Also the cable connectors and mobo pins are marked differently. Appreciate if...