Greetings I have two printers and two laptops. I want to be able to use either printer with either laptop but am unsure as to the best way to connect them. I had a look in my local PC World and was rather confused by all the different hubs. Can anyone suggest the simplest and possibly cheapest way...

On 20 Aug 2003 20:41:38 -0700, (James Benson) wrote: Apparently I am the only person who has ever owned a printer who has had this problem. I contacted HP about it, but after doing everything they suggested (even though I had already done those things before I called)...

If you're using XP or 2000 which theoretically have no DOS, you can print from an old DOS program using Bruce Sanderson's article at http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "Angelo Campanella" wrote in...

I am using the driver with the Minolta Desklaser 2200 for Windows 98 SE. Everytime I try to print something I get a genral protection fault or illegal operation with Zspool32. It doesn't say zspool32, but that is what is "not responding" in the task manager and zspool32 wasn't running until I...

cash paid for these and other types of fusers or printers Reply back Juan

When I switch on my printer the green light associated with the power button flashes, and goes on flashing until I press the maintenance button for long enough for something to move. Then the system works normally. It was not always like this, only after I had some computer problems which...

Anyone know if a printer is quoted as being PCL5e does that mean it is PCL5 too? -- RCE Defiant

The paper just begins to feed and all 3 lights come on. The only way to reset it is by unplugging it. Is this a fuser problem? The heater resistance is 34 ohms. Chris

Can the "Engine ROM" be updated by downloading it to the printer or is it a more techie prob. My MC2 has ver A2 with no calibration/density and i would like to update it to A3 or later ?. I've updated the firmware and crownnet thanks to a kind person on this group. Rgds

I'm replacing my HP-970, too, and am also looking at the Canon 850i and 950i printers. Both are excellent printers for photos, from what I've read, but they aren't quite as good with text. So....I picked up a Samsung ML-1710 laser printer this weekend for $99 at Office Depot, and will get a...

I took a chance on replacement cartridges for my Epson Stylus Phot 820. I purchased Rhinotek from PC Connection. I first replaced my color inks. After 14 cleaning cycles over two days I still kept getting clogs. They moved all over the place. At one point the yellow didn't print at all. During...

Hi, I have the following problem: Everytime I try to print a Document, that has the font "MS_Unicode Arial" in it, my printer and my computer crashes down. (MS Windows 2000). Is this a well-known problem and is there any solution except changing the font (sometimes it's not that easy in an...

I'm considering buying refil kits from tonerrefillkits.com for my HP 4500 color laserjet. On the 4500, the drum (which has the excess reservoir), is in a seperate component. I'm not sure if there's actually anything besides toner inside the toner cartridge itself. Has anyone used these kits with...

The Epson C82 or the new C84. The ink is waterproof on plain paper. Individual carts. Fast. The C82 is discontinued so you will find good pricing. "lordmajax" wrote in message ... Hey all, I'm looking for a printer...

But of course all compatibles are not created equal are they... Tony -- aberdabadoo UK auction site with special free sellers bonus setup - get in quick... http://www.aberdabadoo.co.uk remove pants to reply "J.D" wrote in message ... Good...

this is a real long shot , but no harm in asking .............. an old panasonic dot matrix kx-p1081 with internal SERIAL interface card the dip switch settings on the serial card have been disturbed NOT the switches for print modes etc located under the printhead ... those ones ARE covered in...

I have an HP 1600/CM which starts to print and then almost immediately stops with the Check Paper and Check Print Cartridges lights flashing. Power off/on and the sheet ejects. This can be repeated until the printer has "warmed up", which can take 10 - 15 minutes. It then prints complete...

Here am trying to convert the PCL command into the GDI calls , The PCL command are as...

Bob. My 1120c picked up a quarter inch thick pile of paper. What a jam. How do I disassemble to get the paper out? Any reply appreciated. Warren

I suspect my Epson stylus color 980 is worn out. Has anyone else seen this problem? What did you do to solve it? Over the past couple months (it's getting worse), I have noticed that color images I print have two problems. These problems were not present a year ago, and I'm using pretty much the...